Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

2.10

CiteScore

Material Engineering

Characterization of wood plastic composites using jackfruit wood sawdust in a PLA/HDPE blend

Characterization of wood plastic composites using jackfruit wood sawdust in a PLA/HDPE blend

Experimental Study of Deep Drawing of High-Strength Carbon Fiber-HDPE Composites

Experimental Study of Deep Drawing of High-Strength Carbon Fiber-HDPE Composites

Novel self-assembled tellurium nanoparticles and their effects in inhibition of myoblastoma cell line

Novel self-assembled tellurium nanoparticles and their effects in inhibition of myoblastoma cell line

Identification Of The Causes Of The Seabed Dynamics (Cotonou Coast/Benin)

Identification Of The Causes Of The Seabed Dynamics (Cotonou Coast/Benin)

Carbon nanodots from used green tea biochar: antibacterial applications and antibiofilm carbon coatings

Carbon nanodots from used green tea biochar: antibacterial applications and antibiofilm carbon coatings

Effect of Mg/ Cu additives on the ability to synthesize SiC from rice husk

Effect of Mg/ Cu additives on the ability to synthesize SiC from rice husk

Experimental Investigation of Particle Sorting in Y-Channels with Variable Bifurcation Angles for Microfluidic Applications

Experimental Investigation of Particle Sorting in Y-Channels with Variable Bifurcation Angles for Microfluidic Applications

Preparation and Performance Optimization of Bacterial Slag-Based Activated Carbon Considering Hardness and Electrical Properties

Preparation and Performance Optimization of Bacterial Slag-Based Activated Carbon Considering Hardness and Electrical Properties

Improvement in the Mechanical Properties of Different Cooling Medium-treated 56Fe25Ni16Cr Austenitic Stainless Steel for Advanced Nuclear Reactor Applications

Improvement in the Mechanical Properties of Different Cooling Medium-treated 56Fe25Ni16Cr Austenitic Stainless Steel for Advanced Nuclear Reactor Applications

Ni Layer Fabrication in Various Temperature of Watts Solution

Ni Layer Fabrication in Various Temperature of Watts Solution

Study on photocatalytic and antibacterial ability of TiO2 and TiO2-SiO2 coatings

Study on photocatalytic and antibacterial ability of TiO2 and TiO2-SiO2 coatings

Influence of Calcium Carbonate Content on Properties of Natural Rubber and Acrylic Blends for Coating Applications

Influence of Calcium Carbonate Content on Properties of Natural Rubber and Acrylic Blends for Coating Applications

Numerical analysis of crack growth in a multi-layer composite tank under thermal and mechanical loading

Numerical analysis of crack growth in a multi-layer composite tank under thermal and mechanical loading

Producing a Ferroalloy and Zinc Concentrate from the Shalkiya Deposit Sulfide and Oxidized Ores’ Mixture

Producing a Ferroalloy and Zinc Concentrate from the Shalkiya Deposit Sulfide and Oxidized Ores’ Mixture

Utilizing hybrid machine learning to estimate the Compressive Strength of High-Performance Concrete

Utilizing hybrid machine learning to estimate the Compressive Strength of High-Performance Concrete

Impregnation Quality of Carbon Fiber Reinforced Waste Polypropylene with Variation of Fiber Treatment and Matrix Recycling Cycles

Impregnation Quality of Carbon Fiber Reinforced Waste Polypropylene with Variation of Fiber Treatment and Matrix Recycling Cycles

Optimization of Energy Consumption, Density, and Shrinkage in Plastic Injection Molding Process

Optimization of Energy Consumption, Density, and Shrinkage in Plastic Injection Molding Process

Biocomposites based on micro cellulose extracted from Paederia Foetida fibers and investigation of important properties

Biocomposites based on micro cellulose extracted from Paederia Foetida fibers and investigation of important properties

An Experimental Study to Determine the Correlation Between Tool Wear and Residual Stresses Induced in Turning of Inconel 718

An Experimental Study to Determine the Correlation Between Tool Wear and Residual Stresses Induced in Turning of Inconel 718

Study on High Temperature Wear Law and Wear Prediction Method of Hot Forging Die Steel H13

Study on High Temperature Wear Law and Wear Prediction Method of Hot Forging Die Steel H13

Page 1 of 6

Magnesium Hybrid Metal Composite via Infiltrated Stir Casting Technique: A Novel Approach to Enhance Energy Absorption

Magnesium Hybrid Metal Composite via Infiltrated Stir Casting Technique: A Novel Approach to Enhance Energy AbsorptionVolume 29, Issue 2

Removal of Eriochrome Black T (EBT) and Its Pb(II)-, Cu(II)-, and Zn(II)-Based Metal Complexes from Aqueous Solutions Using Spent Coffee Grounds: Part A – Characterization and Adsorption Isotherms

Removal of Eriochrome Black T (EBT) and Its Pb(II)-, Cu(II)-, and Zn(II)-Based Metal Complexes from Aqueous Solutions Using Spent Coffee Grounds: Part A – Characterization and Adsorption IsothermsVolume 29, Issue 1

Calculus accumulation-based method for extracting values of instrumentation image

Calculus accumulation-based method for extracting values of instrumentation imageVolume 29, Issue 2

Research on determining the correlation between the strength of the concrete core and the concrete used as tubular formwork in compressed structural elements

Research on determining the correlation between the strength of the concrete core and the concrete used as tubular formwork in compressed structural elementsVolume 29, Issue 2

Design of a Visual Communication System for Animated Characters in Virtual Reality Using Sobel Edge Detection and Motion Capture

Design of a Visual Communication System for Animated Characters in Virtual Reality Using Sobel Edge Detection and Motion CaptureVolume 29, Issue 1

Investigation of the Cyclic Performance of Flat Steel Shear Walls Stiffened with Double-Sided Trapezoidal Corrugated Plates

Investigation of the Cyclic Performance of Flat Steel Shear Walls Stiffened with Double-Sided Trapezoidal Corrugated PlatesVolume 29, Issue 1

Hierarchical Control of Energy Router Based on MPC and Real-Time Optimization Methods for Distribution Network

Hierarchical Control of Energy Router Based on MPC and Real-Time Optimization Methods for Distribution NetworkVolume 29, Issue 1

Using additives to enhance the compressive strength of particulate composites

Using additives to enhance the compressive strength of particulate compositesVolume 29, Issue 1

Characterization of wood plastic composites using jackfruit wood sawdust in a PLA/HDPE blend

Characterization of wood plastic composites using jackfruit wood sawdust in a PLA/HDPE blendVolume 29, Issue 1

Detecting sand gradation based on the two-dimensional sand particle features in sand images

Detecting sand gradation based on the two-dimensional sand particle features in sand imagesVolume 29, Issue 1

Takagi-Sugeno Model-Based Control with Observer Design for Disturbance Rejection and Input Constraints in Rotary Inverted Pendulum Systems

Takagi-Sugeno Model-Based Control with Observer Design for Disturbance Rejection and Input Constraints in Rotary Inverted Pendulum SystemsVolume 29, Issue 1

Process Intensification and Optimization of Bio-Indigo Production from Indigofera tinctoria using Trichoderma Cellulase

Process Intensification and Optimization of Bio-Indigo Production from Indigofera tinctoria using Trichoderma CellulaseVolume 29, Issue 1

Artificial intelligence-based Bayesian optimization and transformer model for tennis motion recognition

Artificial intelligence-based Bayesian optimization and transformer model for tennis motion recognitionVolume 29, Issue 1

Red Fox Optimization-Based Estimation Algorithms for Splitting Tensile Strength of Basalt Fiber Reinforced Concrete

Red Fox Optimization-Based Estimation Algorithms for Splitting Tensile Strength of Basalt Fiber Reinforced ConcreteVolume 29, Issue 1

Trustworthy-constraint Deep Graph Learning for Enterprise Financial Risk Prediction

Trustworthy-constraint Deep Graph Learning for Enterprise Financial Risk PredictionVolume 29, Issue 1

Optimal allocation of supercapacitor energy storage system capacity for mitigating wind power fluctuations

Optimal allocation of supercapacitor energy storage system capacity for mitigating wind power fluctuationsVolume 29, Issue 1

Adaptive Context-Aware Generative Adversarial Network for Low-quality Image Enhancement

Adaptive Context-Aware Generative Adversarial Network for Low-quality Image EnhancementVolume 29, Issue 1

Pig behavior recognition and disease warning based on compressed sensing and long-short term memory network

Pig behavior recognition and disease warning based on compressed sensing and long-short term memory networkVolume 29, Issue 1

Knowledge Graph Representation Learning Model Based on Capsule Network and Information Fusion

Knowledge Graph Representation Learning Model Based on Capsule Network and Information FusionVolume 29, Issue 1

The Effectiveness Of Alkali Ttreatment And Dispersing Agents In Enhancing The Mechanical Performance Of HDPE/Water Hyacinth Fiber Biocomposites

The Effectiveness Of Alkali Ttreatment And Dispersing Agents In Enhancing The Mechanical Performance Of HDPE/Water Hyacinth Fiber BiocompositesVolume 29, Issue 1

An Automatic Welding Seam Extraction Method for Butt Workpieces with Varying Seam Widths Based on DLP Vision

An Automatic Welding Seam Extraction Method for Butt Workpieces with Varying Seam Widths Based on DLP VisionVolume 29, Issue 1

Study on Thermal/Moisture Expansion Stress of a Drop-Out Fuse Insulator

Study on Thermal/Moisture Expansion Stress of a Drop-Out Fuse InsulatorVolume 29, Issue 1

Biomechanical Simulation Analysis and Experimental Study of Puncture Force in Arteriovenous Fistula for Hemodialysis

Biomechanical Simulation Analysis and Experimental Study of Puncture Force in Arteriovenous Fistula for HemodialysisVolume 29, Issue 1

Porous cobalt oxide nanorods-like-based material as an effective electrochemical glucose sensor

Porous cobalt oxide nanorods-like-based material as an effective electrochemical glucose sensorVolume 29, Issue 1

Machine Learning-Based Surface Roughness Prediction in Turning of Hardened AISI 4340 Steels: Incorporating Tool Wear via Cutting Length

Machine Learning-Based Surface Roughness Prediction in Turning of Hardened AISI 4340 Steels: Incorporating Tool Wear via Cutting LengthVolume 29, Issue 1

A DI-SRM Model for Production Bottleneck Prediction in Flexible Production Line

A DI-SRM Model for Production Bottleneck Prediction in Flexible Production LineVolume 28, Issue 7

Spatiotemporal pattern analysis of land use in Jiangsu Province based on long-term time series remote sensing images

Spatiotemporal pattern analysis of land use in Jiangsu Province based on long-term time series remote sensing imagesVolume 29, Issue 1

Scheduling Method of AGV in Spinning Workshop Based on Simulated Annealing Ant Colony Optimization

Scheduling Method of AGV in Spinning Workshop Based on Simulated Annealing Ant Colony OptimizationVolume 29, Issue 1

Mining Data Patterns in Chinese-English Translation via Multi-granularity Contrastive Learning

Mining Data Patterns in Chinese-English Translation via Multi-granularity Contrastive LearningVolume 28, Issue 11

The Impact of Environmental Factors on Image Qualities of Holographic Projection

The Impact of Environmental Factors on Image Qualities of Holographic ProjectionVolume 28, Issue 12

Optimization of Wood Powder Particle Size and Weight Fraction for Enhancing the Mechanical Properties of Wood Plastic Composites Using Recycled EPS Matrix

Optimization of Wood Powder Particle Size and Weight Fraction for Enhancing the Mechanical Properties of Wood Plastic Composites Using Recycled EPS MatrixVolume 28, Issue 12

Experimental Study of Deep Drawing of High-Strength Carbon Fiber-HDPE Composites

Experimental Study of Deep Drawing of High-Strength Carbon Fiber-HDPE CompositesVolume 28, Issue 12

Article1
Article2
Article3
Article4
Article5
Article6
Article7
Article8

Partners