Hongbing Wang This email address is being protected from spambots. You need JavaScript enabled to view it.1, Xu Liu2, Chunhua Sun2, and Hongwei Li2
1Department of Mechanical & Electrical EngineeringSuzhou Vocational University, Suzhou, 215104, China 2C-Product Intelligent Manufacturing Engineering Technology Research and Development Center, Suzhou, 215104, China
Received: November 7, 2022 Accepted: February 14, 2023 Publication Date: March 9, 2023
Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.
Aiming at the problems of large volume, large noiseinconvenient useinsufficient thrust and short life of the existing nail shooting device, a kind of nail shooting device driven by voice coil linear motor with magnifying mechanism was designed and manufactured. Firstly, the components and working principle of the nail shooting device were analyzed. Secondly, the mathematical model of the magnetic field driving force of voice coil linear motor was established, and the simulation calculation of the electromagnetic field of the motor was carried out. The influence of the excitation current, the position of the shaft core, the length of the shaft core, and the diameter of the shaft core on the electromagnetic force acting on the shaft core was studied. Then the working principle of magnifying mechanism was studied. Finally, the nail shooting device was made and tested. The results showed that the volume of the nail shooting device was ϕ40×60 mm 3, the mass is 550g, the maximum thrust is 154N, the nail speed can reach 21 m/s, the stable thrust is 120N, and the service life is 1500h.
Keywords: Voice coil; Linear motor; Nail shooting; Magnifying mechanism
REFERENCES
[1] W. Zhong, G. L. Tao, H. Liu, and Z. Xiang, (2008) “Mathematical modeling and simulation of pneumatic nail gun" Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University 42(2): 239–242.
[2] Z. Geng and Z. Feng, (2010) “Working principle of pneumatic gun and improvement for leakage" Journal of Suzhou University (Engineering Science Edition):
[3] L. I. Yang, X. Xia, and J. Chen, (2017) “Development and test of a portable double-cylinder pneumatic nail gun" Journal of Zhejiang University of Science and Technology:
[4] W. Q. Liang, Z. Y. Weng, Y. L. Jiang, F. H. Zhu, and J. H. Mei, (2009) “Performance Test System of the Electric Nail-gun" Light Industry Machinery:
[5] C. Kai, (2011) “Needle-free Liquid Injection System Powered by Voice-coil Linear Actuator" Journal of Mechanical Engineering 47(9): 151. DOI: 10.1109/MACE.2010.5536122.
[6] J. B.Wang, K. Chen, X. U. Xiao-Hua, and G. J. Zhang, (2016) “Volume-adjustable continuous-jet needle-free injector driven by voice coil motor" Journal of Mechanical Electrical Engineering:
[7] C.-S. Liu, S.-S. Ko, and P.-D. Lin, (2010) “Experimental characterization of high-performance miniature autofocusing VCM actuator" IEEE Transactions on Magnetics 47(4): 738–745. DOI: 10.1109/TMAG.2010.2103084.
[8] C. S. Liu, L. Kuo, and B. J. Tsai, (2016) “New Electromagnetic Design of Miniature AF VCM Actuator with Low Cost" Journal of Mechanics 32(04): 421–426. DOI: 10.1017/jmech.2015.90.
[9] C.-S. Liu, Y.-H. Chang, and H.-F. Li, (2016) “Design of an open-loop controlled auto-focusing VCM actuator without spring plates" International Journal of Applied Electromagnetics and Mechanics 51(1): 61–70. DOI: 10.3233/JAE-150166.
[10] C. L. Hsieh, C. S. Liu, and C. C. Cheng, (2020) “Design of a 5 degree of freedom–voice coil motor actuator for smartphone camera modules" Sensors and Actuators A Physical 309: 112014. DOI: 10.1016/j.sna.2020.112014.
[11] F. Wang, C. Liang, Y. Tian, X. Zhao, and D. Zhang, (2015) “Design of a Piezoelectric-Actuated Microgripper With a Three-Stage Flexure-Based Amplification" IEEE/ASME Transactions on Mechatronics 20(5): 2205–2213. DOI: 10.1109/TMECH.2014.2368789.
[12] W. Geng, B. Yya, A. Jm, and J. C. Cui, (2019) “Design, test and control of a compact piezoelectric scanner based on a compound compliant amplification mechanism" Mechanism and Machine Theory 139: 460–475. DOI: 10.1016/j.mechmachtheory.2019.05.009.
[13] Higuchi, Toshiro, Nabae, and Hiroyuki, (2015) “A Novel Electromagnetic Actuator Based on Displacement Amplification Mechanism" IEEE/ASME transactions on mechatronics: A joint publication of the IEEE Industrial Electronics Society and the ASME Dynamic Systems and Control Division: DOI: 10.1109/TMECH.2014.2360316.
[14] X. Lu, Q. Gao, Y. Li, Y. Yu, X. Zhang, G. Qiao, and T. Cheng, (2020) “A linear piezoelectric stick-slip actuator via triangular displacement amplification mechanism" IEEE Access 8: 6515–6522. DOI: 10.1109/ACCESS.2019.2963680.
[15] Y. Zhang, Y. Peng, Z. Sun, and H. Yu, (2018) “A Novel Stick-Slip Piezoelectric Actuator Based on a Triangular Compliant Driving Mechanism" IEEE Transactions on Industrial Electronics PP(99): 1–1. DOI: 10.1109/TIE.2018.2868274.
[16] Y. NI, M.WANG, T. CHEN, X. ZHANG, C. NI, and J. LIU, (2021) “Design and Experimental Study of Magnetoresistive Electromagnetic Energy Storage Needlel-free Injection System" China Mechanical Engineering 32(02): 227. DOI: 10.3969/j.issn.1004- 132X.2021.02.014.
We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.