Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

1.60

CiteScore

Ru-Shi Liu1 , Chien-Yuan Wang1 , Ling-Yun Jang2 and Jyh-Fu Lee2

1Department of Chemistry National Taiwan University Taipei, Taiwan 106, R.O.C.
2Synchrotron Radiation Research Center Hsinchu, Taiwan 300, R.O.C.


 

Received: April 15, 2002
Accepted: May 20, 2002
Publication Date: June 1, 2002

Download Citation: ||https://doi.org/10.6180/jase.2002.5.2.06  


ABSTRACT


The lithiated transition metal oxide LiVMoO6 has been synthesized by solid state reaction. This is the first report of this compound to be studied as an anode material for use in secondary batteries. The synthesized LiVMoO6 powder has been studied by means of X-ray diffraction (XRD) and X-ray absorption near edge structure (XANES) spectroscopy. The electrochemical characteristics of the prepared electrodes assembled in coin cells were also investigated in terms of half-cell performance. It is observed that the cell exhibits three stages of discharge plateaus. The total discharge capacity, averaged over several test runs, is about 1250 mAh/g. This value is much higher than the capacities exhibited by many kinds of anode materials.


Keywords: Li-ion Batteries, Anode, X-ray Absorption, XANES, LiVMoO6


REFERENCES


  1.  [1] Michael, M. S.; Fauzi, A.; Prabaharan, S. R. S. Int. J. Inorg. Mater. 2000, 2, 261.
  2. [2] Gopalakrishnan, J.; Bhuvanesh, N. S. P.; Vijayaraghavan, R.; Vasanthacharya, J. Mater. Chem. 1997, 7, 307.
  3. [3] Larson, A. C.; von Dreele, R. B. Generalized Structure Analysis System; Los Alamos National Laboratory, Los Alamos, New Mexico, U.S.A., 1994.
  4. [4] Bair, R. A.; Goddard III, W. A. Phys. Rev. B 1980, 22, 2767.
  5. [5] Wang, J.; Lytle, F. W.; Messmer, R. P.; Maylotte, D. H. Phys. Rev. B 1984, 30, 5596.
  6. [6] Poizot, P.; Laruelle, S.; Grugeon, S.; Dupont, L.; Tarascon, J.-M. Nature 2000, 407, 496. 


    



 

1.6
2022CiteScore
 
 
60th percentile
Powered by  Scopus

SCImago Journal & Country Rank

Enter your name and email below to receive latest published articles in Journal of Applied Science and Engineering.