Cross section of the CMOS pressure sensor. A Piezoresistive Micro Pressure Sensor Fabricated by Commercial DPDM CMOS Process
Drawing of the chamber of the measurement device. A Novel Measurement Device for SAW Chemical Sensors with FT-IR Spectro-microscopic Analytical Capability
Influence of Chebyshev Collocation Points on the Convergence of Results in the Analysis of Annular Plate Vibrations
Geometry of the prototype bridge. Effects of Deck Shape and Oncoming Turbulence on Bridge Aerodynamics
Analytical model of tower system. Seismic Analysis of Transmission Towers Considering Both Geometric and Material Nonlinearities
Variation of over-voltage with equilibrium Machining gap. When tool feed rate (f) is varied as equilibrium machining gap. Other data are same as in Figure 1. Effect of Over Voltage on Material Removal Rate During Electrochemical Machining
The Effect of Suction and Injection on the Unsteady Flow Between two Parallel Plates with Variable Properties