Eco-friendly Flax (Linum usitatissimum) Fiber/Epoxy Resin Composites for Sludge Reinforcement: Quicklime Modification, Synergistic Effect and Mechanical Performance

Qiang  Ma; Siyu  Qin; Weiqing  Lin; Yue  Tao

doi:10.6180/jase.202608_31.049

Eco-friendly Flax (Linum usitatissimum) Fiber/Epoxy Resin Composites for Sludge Reinforcement: Quicklime Modification, Synergistic Effect and Mechanical Performance

Qiang Ma, Siyu Qin, Weiqing LinThis email address is being protected from spambots. You need JavaScript enabled to view it., and Yue Tao

Key Laboratory of Intelligent Health Perception and Ecological Restoration of Rivers and Lakes, Ministry of Education; Hubei Key Laboratory of Environmental Geotechnology and Ecological Remediation for Lake & River; Innovation Demonstration Base of Ecological Environment Geotechnical and Ecological Restoration of Rivers and Lakes; Hubei University of Technology, Wuhan 430068, China

Received: October 18, 2025
Accepted: February 9, 2026
Publication Date: March 5, 2026

Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.

Download Citation: ||https://doi.org/10.6180/jase.202608_31.049

Sludge, with high compressibility and low strength, often fails to meet bearing capacity and deformation resistance requirements in engineering. Natural fibers have sludge reinforcement potential, yet their corrosion susceptibility and weak interfacial bonding impair service performance. In this study, a composite system of surface-modified flax fibers and epoxy resin was employed for sludge reinforcement. Via tensile tests, unconfined compressive strength (UCS) test, and consolidated undrained triaxial compression (CUTC) test, the effects of fiber modification methods, fiber content, and epoxy resin content on the mechanical properties of sludge were investigated. Additionally, the synergistic mechanism of fibers and resin on sludge was revealed via microscopic characterization. Test results showed epoxy resin significantly inhibited fiber corrosion. Quicklime-modified flax fibers enhanced interfacial bonding with epoxy, increasing composite fiber tensile strength by 16.2% and elongation at break by 3.35 times. For sludge reinforcement, the optimum epoxy and fiber dosage were 12% and 0.6%, respectively. Under this condition, the 7d UCS reached 824.54 kPa (> 5 times untreated sludge), ductility improved to 7%, and cohesion (124.43 kPa) and internal friction angle (39.83^◦) peaked simultaneously. Scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) test revealed resin formed dense bonds to reduce porosity, fibers bridged for stress transfer, and their synergy achieved brittle-to-ductile transition with enhanced long-term stability.

Keywords: Sludge, Flax fiber, Epoxy resin, Surface modification, Mechanical properties

[1] Q.Meng,Y.Li,W.Wang,Y.Chen,andS.Wang,(2023) “A Case Study Assessing the Liquefaction Hazards of Silt Sediments Based on the Horizontal-to-Vertical Spectral Ratio Method" Journal of Marine Science and Engineering 11: 104. DOI: 10.3390/jmse11010104.
[2] H. Lei, C. E. Codjia, S. Feng, J. Li, and K. Murad, (2025) “Reinforcement treatment of dredging sludge using a novel method of electro-osmosis vacuum preloading" Marine Georesources & Geotechnology 43: 137–153. DOI: 10.1080/1064119X.2024.2327651.
[3] F.Zhu,Z.Li,W.Dong,andY.Ou,(2019)“Geotechnical properties and microstructure of lime-stabilized silt clay" Bulletin of Engineering Geology and the Environment 78: 2345–2354. DOI: 10.1007/s10064-018-1307-5.
[4] M. Amarakoon, H. Alenezi, S. Homer-Vanniasinkam, and M.Edirisinghe, (2022) “Environmental Impact of Polymer Fiber Manufacture" Macromolecular Mate rials and Engineering 307: 2200356. DOI: 10.1002/mame.202200356.
[5] M. M. Shalchian and M. Arabani, (2023) “Application of plant-derived fibers in soil reinforcement on experimental, numerical, and case study scales: a review" Bulletin of Engineering Geology and the Environment 82: 19. DOI: 10.1007/s10064-022-03029-8.
[6] C. Liu, X. Yu, E. D. Shumuye, Y. Zhang, B. Dong, H. Xiao, H. Zhong, and G. Fang, (2025) “Engineer ing properties of strain-hardening geopolymer composites reinforced with various natural fibers: Multiscale synergistic optimization and sustainability" Construction and Building Materials 490: 142423. DOI: 10.1016/j.conbuildmat.2025.142423.
[7] H. Yang, P. Li, Z. Wei, and X. Jiang, (2025) “The Strength Law of Coconut Shell Fiber-Reinforced Soils Based on the Hardin-Drnevich Model" International Journal of Geomechanics25:04025116. DOI:10.1061/IJGNAI.GMENG-11057.
[8] Q.Ma,J.Wu,Y.Bai,andH.Xiao,(2024)“Effect of Xan than Gum on the mechanical properties of fiber-reinforced sandy soil" Bulletin of Engineering Geology and the Environment 83: 177. DOI: 10.1007/s10064-024 03673-2.
[9] T.-C. Hsu, G.-L. Guo, W.-H. Chen, and W.-S. Hwang, (2010) “Effect of dilute acid pretreatment of rice straw on structural properties and enzymatic hydrolysis" Bioresource technology 101: 4907–4913. DOI: 10.1016/j.biortech.2009.10.009.
[10] S. R. Muradova, E.-S. Negim, A. R. Makhmetova, D. T. Ainakulova, and N. M. I. Mohamad, (2023) “An Overview of the Current State and the Advantages of using acrylic resins as anticorrosive coatings" Kompleks noe Ispolzovanie Mineralnogo Syra=Complex Use of Mineral Resources 327: 90–98. DOI: 10.31643/2023/6445.44.
[11] H. Youn, Y. Hong, A. Yu, J. Jeong, and M. Goh, (2023) “Synthesis of oxime ester-based epoxy resin with chemical recyclability" Journal of Applied Polymer Science 140: e54212. DOI: 10.1002/app.54212.
[12] M.G.Veigas,M.Najimi,andB.Shafei,(2022)“Cementitious composites made with natural fibers: Investigation of uncoated and coated sisal fibers" Case Studies in Construction Materials 16: e00788. DOI: 10.1016/j.cscm.2021.e00788.
[13] B. Fathi, M. Foruzanmehr, S. Elkoun, and M. Robert, (2019) “Novel approach for silane treatment of flax fiber to improve the interfacial adhesion in flax/bio epoxy composites" Journal of Composite Materials 53: 2229–2238. DOI: 10.1177/0021998318824643.
[14] D. J. Hayne, M. Singleton, B. A. Patterson, D. B. Knorr, F. Stojcevski, and L. C. Henderson, (2024) “Carbon fiber surface treatment for improved adhesion and performance of poly dicyclopentadiene composites synthesized by ring opening metathesis polymerization" Composites Communications 47: 101872. DOI: 10.1016/j.coco.2024.101872.
[15] W. W. Raharjo, K. Dewi, B. Kusharjanta, A. M. Al Farizy, N. I. Ismail, and A. Larasati, (2026) “The Effectiveness Of Alkali Treatment And Dispersing Agents In Enhancing The Mechanical Performance Of HDPE/Water Hyacinth Fiber Biocomposites" Journal of Applied Science and Engineering 29: 77–87. DOI: 10.6180/jase. 202601_29(1).0008.
[16] B. M. Barbosa, S. Vaz Jr, J. L. Colodette, A. R. de Aguiar, C. P. Tavora Cabral, and B. d. F. Homem de Faria, (2022) “Structural and chemical characterization of lignin and hemicellulose isolated from corn fibers toward agroindustrial residue valorization" Cellulose 29: 8117 8132. DOI: 10.1007/s10570-022-04769-2.
[17] S. Guo, Z. Yu, B. Peng, K. Li, S. Xia, and H. Zheng, (2024) “Superhydrophobic Waterborne Epoxy Composite Coating with Good Mechanical Properties, Icing Resistance, Self-Cleaning Properties, and Corrosion Resistance" Langmuir 40: 15661–15676. DOI: 10.1021/acs.langmuir.4c01407.
[18] Q. Ma, J. Lei, J. He, Z. Chen, and W. Li, (2024) “Epoxy resin for solidification/stabilization of soil contaminated with copper (II): Leaching, mechanical, and microstructural characterization" Environmental Research 240: 117512. DOI: 10.1016/j.envres.2023.117512.
[19] G. Lazorenko, A. Kasprzhitskii, V. Mischinenko, A. Fedotov, and E. Kravchenko, (2024) “Effect of Flax By-Products on the Mechanical and Cracking Behaviors of Expansive Soil" Materials 17: 5659. DOI: 10.3390/ma17225659.
[20] C. J. Medina-Martinez, L. C. Sandoval Herazo, S. A. Zamora-Castro, R. Vivar-Ocampo, and D. Reyes Gonzalez, (2023) “Use of Sawdust Fibers for Soil Reinforcement: A Review" Fibers 11: 58. DOI: 10.3390/fib11070058.
[21] P. Zheng, W. Li, Q. Ma, and L. Xi, (2023) “Mechanical properties of phosphogypsum-soil stabilized by lime activated ground granulated blast-furnace slag" Construction and Building Materials 402: 132994. DOI: 10.1016/j.conbuildmat.2023.132994.
[22] X. Xiao, M. Cheng, and Y. Zhong, (2022) “Effects of Alkali Treatment on the Mechanical Properties and Moisture Absorption Behavior of Flax/polypropylene Composites" Journal of Natural Fibers 19: 9201–9222. DOI: 10.1080/15440478.2021.1982813.
[23] A. Adel Salih, R. Zulkifli, and C. H. Azhari, (2020) “Tensile Properties and Microstructure of Single-Cellulosic Bamboo Fiber Strips after Alkali Treatment" Fibers 8: 26. DOI: 10.3390/fib8050026.
[24] M. Mohammed, R. Rahman, A. M. Mohammed, T. Adam, B. O. Betar, A. F. Osman, and O. S. Dahham, (2022) “Surface treatment to improve water repellence and compatibility of natural fiber with polymer matrix: Recent advancement" Polymer Testing 115: 107707. DOI: 10.1016/j.polymertesting.2022.107707.
[25] N.L. andM.V.D.Poures. “Experimental investigations of heat ageing with chemical modification of hemp fiber elastic characteristics”. In: International Conference on Mathematical and Statistical Physics, Computational Science, Education and Communication (ICM SCE 2023). 12936. 2023, 380–385. DOI: 10.1117/12.3011708.
[26] K. Vijayakkannan and I. Rajendran, (2024) “Extraction and characterization of a new natural cellulosic fiber from the Habara Plant Stem (HF) as potential reinforcement for polymer composites" International Journal of Biological Macromolecules 269: 131818. DOI: 10.1016/j.ijbiomac.2024.131818.
[27] D. M. Donnelly, L. C. de Resende, D. E. Cook, R. H. Atalla, and D. K. Combs, (2018) “Technical note: A comparison of alkali treatment methods to improve neutral detergent fiber digestibility of corn stover" Journal of Dairy Science 101: 9058–9064. DOI: 10.3168/jds.2017 14317.
[28] N. F. Ismail, N. A. M. Radzuan, A. B. Sulong, N. Muhamad, and C. H. C. Haron, (2021) “The Effect of Alkali Treatment on Physical, Mechanical and Thermal Properties of Kenaf Fiber and Polymer Epoxy Composites" Polymers 13: 2005. DOI: 10.3390/polym13122005.
[29] M. Ramesh, (2019) “Flax (Linum usitatissimum L.) fibre reinforced polymer composite materials: A review on preparation, properties and prospects" Progress in Materials Science 102: 109–166. DOI: 10.1016/j.pmatsci. 2018.12.004.
[30] T. Senthilkumar, A. K. Bharimalla, C. Sundaramoor thy, P. G. Patil, and N. Vigneshwaran, (2020) “Fibrillation of Coconut Fibers by Mechanical Refining to Enhance Its Reinforcing Potential in Epoxy Composites" Fibers and Polymers 21: 2111–2117. DOI: 10.1007/s12221-020-9754-6.
[31] W. Zhang, M. Dai, X. Liang, X. Wang, W. Wei, and Z. Zhou, (2023) “Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites" Materials 16: 3825. DOI: 10.3390/ma16103825.
[32] F. Rothenhaeusler, A.-A. Ouali, R. Rinberg, M. Demleitner, L. Kroll, and H. Ruckdaeschel, (2024) “Influence of sodium hydroxide, silane, and siloxane treatments on the moisture sensitivity and mechanical properties of f lax fiber composites" Polymer Composites 45: 8937 8948. DOI: 10.1002/pc.28386.
[33] O. Hurtado-Figueroa, H. Varum, M. I. Prieto, R. J. Gallardo Amaya, and A. C. Escamilla, (2025) “The alkaline treatment and its influence on the physicomechanical properties of plantain pseudostem fibers- A comparative study of treated and untreated fibers" Heliyon 11: e41843. DOI: https://doi.org/10.1016/j.heliyon.2025. e41843.
[34] S. Wang, Z. Meng, Q. Zhao, T. Zhao, J. Jin, and Z. Lu, (2024) “Experimental study on the characteristics and resistance against the coupling effect of freeze-thaw and chloride salt erosion of sticky rice-lime composites modified with metakaolin and hemp fibers" Construction and Building Materials 416: 135240. DOI: 10.1016/j.conbuildmat.2024.135240.
[35] H. Ramasawmy, J. Chummun, and P. D. Emrith, (2022) “Slaked Lime Solution as a Viable Eco-friendly Treatment to Improve the Tensile Strength of Maize Stem Fibers" Journal of Natural Fibers 19: 9600–9613. DOI: 10.1080/15440478.2021.1990177.
[36] M. K. Al Mesfer, (2021) “Optimizing the Sodium Hydroxide Conversion Using Regression Analysis in CSTR" Applied Sciences 11: 6789. DOI: 10.3390/app11156789.
[37] D. Lin, X. Wang, M. Zhang, S. Yuan, F. Xu, D. Bao, and H. Wang, (2022) “A robust and eco-friendly waterborne anti-corrosion composite coating with multiple synergistic corrosion protections" Composites Part B: Engineering 232: 109624. DOI: 10.1016/j.compositesb. 2022.109624.
[38] A. Ulu, A. I. Tutar, A. Kurklu, and F. Cakir, (2022) “Effect of excessive fiber reinforcement on mechanical properties of chopped glass fiber reinforced polymer concretes" Construction and Building Materials 359: 129486. DOI: 10.1016/j.conbuildmat.2022.129486.
[39] K. Fan, Q. Pei, L. Liu, Z. Han, and W. Zou, (2022) “Strength and microstructure of a lignin fiber-reinforced expansive soil in cold regions" Geosynthetics International 29: 622–629. DOI: 10.1680/jgein.21.00049a.
[40] L.Xi,F.Zhou,Q.Ma,H.Xiao,D.Zhang,andS.Hang, (2025) “Potential utilization of phosphogypsum in carbide slag activated ground granulated blast-furnace slag stabilized dredged soil" Sustainable Materials and Technologies 46: e01701. DOI: 10.1016/j.susmat.2025. e01701.
[41] B. Li, J. Chen, H. Wang, and H. Li, (2022) “Kinetics of fast-curing epoxy resin cationic thermopolymerization: Propagated by ACE and AM mechanism" Journal of Thermal Analysis and Calorimetry 147: 11899–11907. DOI: 10.1007/s10973-022-11381-w.