Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

2.10

CiteScore

Xiao Xiong1, Zengyong Xu2, and Yuxia Yuan This email address is being protected from spambots. You need JavaScript enabled to view it.3

1Zhengzhou Electric Power College, Zhengzhou 450000,China
2
Henan College of Transportation, Zhengzhou 450000,China
3
School of Electrical Engineering, Zhengzhou University of Science and Technology, Zhengzhou 450000,China


 

Received: November 9, 2020
Accepted: May 3, 2021
Publication Date: July 5, 2021

 Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.


Download Citation: ||https://doi.org/10.6180/jase.202202_25(1).0003  


ABSTRACT


Accurate power load prediction plays an important role in the design of power distribution equipment and distribution network. The traditional forecasting methods have the problems with low accuracy of power load forecasting and slow model training. In order to improve the accuracy of power load fore-casting, this paper proposes a new method combining Grey correlation-oriented random forest with par-ticle swarm optimization algorithm for power load prediction. The method first uses Grey correlation projection to measure the similarity between the attributes of historical samples and the attributes of predicted samples, and it constructs the similar historical sample data set. Then the decision tree of ran-dom forest is optimized based on particle swarm optimization to improve the prediction accuracy. Fi-nally, Hadoop distributed cluster is used to realize the parallelization of power load prediction and im-prove the prediction efficiency. The experimental results show that the proposed model in this paper has better prediction performance than the traditional power load forecasting methods.


Keywords: Power load prediction, Grey correlation, Random forest, Particle swarm optimization


REFERENCES


  1. [1] K. Bohnert, P. Gabus, J. Kostovic, and H. Brändle, (2005) “Optical fiber sensors for the electric power industry" Optics and Lasers in Engineering 43(3-5): 511–526. DOI: 10.1016/j.optlaseng.2004.02.008.
  2. [2] C. Kang, Y. Wang, Y. Xue, G. Mu, and R. Liao, (2018) “Big data analytics in China’s electric power industry: modern information, communication technologies, and millions of smart meters" IEEE Power and Energy Magazine 16(3): 54–65. DOI: 10.1109/MPE.2018.2790819.
  3. [3] C. K. Ahn, G.-H. Kim, J. E. Lee, K. S. Kim, and K. Kim, (2019) “An SF6 purification process utilizing gas hydrate formation developed for electric power industry" Separation and Purification Technology 217: 221–228. DOI: 10.1016/j.seppur.2019.02.027.
  4. [4] L. Teng, H. Li, S. Yin, S. Karim, and Y. Sun. An active contour model based on hybrid energy and fisher criterion for image segmentation. 2020. DOI: 10.1080/19479832. 2019.1649309.
  5. [5] S. Yin, H. Li, D. Liu, and S. Karim, (2020) “Active contour modal based on density-oriented BIRCH clustering method for medical image segmentation" Multimedia Tools and Applications: 1–20. DOI: 10.1007/s11042-020-09640-9.
  6. [6] H. S. Hippert, C. E. Pedreira, and R. C. Souza, (2001) “Neural networks for short-term load forecasting: A review and evaluation" IEEE Transactions on power systems 16(1): 44–55. DOI: 10.1109/59.910780.
  7. [7] Y. L. Ning Ye and Y.Wang, (2012) “Short-term power load forecasting based on SVM" World Automation Congress 2012: 47–51.
  8. [8] J. Fang, D. Shen, X. Li, and H. Li, (2020) “An efficient power load forecasting model based on the optimized combination" Modern Physics Letters B 34(12): 2050114. DOI: 10.1142/S0217984920501146.
  9. [9] X. Yang, X. Yu, and H. Lu, (2020) “Dual possibilistic regression models of support vector machines and application in power load forecasting" International Journal of Distributed Sensor Networks 16(5): 1550147720921636. DOI: 10.1177/1550147720921636.
  10. [10] X.-D. Chen, Y. Hai-Yue, J.-S. Wun, C.-H. Wu, C.-H. Wang, and L.-L. Li, (2020) “Power load forecasting in energy system based on improved extreme learning machine" Energy Exploration&Exploitation 38(4): 1194–1211.DOI: 10.1177/0144598720903797.
  11. [11] M.-C. Shiu, L.-Y. Wei, J.-W. Liu, D.-Y. Huang, C.-C. Tu, and K.-H. Liao, (2017) “A hybrid one-step-Ahead time series model based on GA-SVR and EMD for forecasting electricity loads" Journal of Applied Science and Engineering 20(4): 467–476. DOI: 10.6180/jase.2017.20.4.08.
  12. [12] Z. Song, D. Niu, X. Xiao, and H. Wu, (2016) “Daily Peak Load Forecasting Based on Fast K-medoids Clustering, GARCH Error Correction and SVM Model" Journal of Applied Science and Engineering 19(3): 249–258.DOI: 10.6180/jase.2016.19.3.02.
  13. [13] J. Li and M. Li, (2020) “Short-term photovoltaic power prediction based on FVS-KELM method" Journal of Applied Science and Engineering 23(2): 289–301. DOI:10.6180/jase.202006_23(2).0013.
  14. [14] Y. Zhang and Z. Hou, (2018) “Short Term Traffic Flow Prediction Based on Improved Support Vector Machine" Journal of Applied Science and Engineering 21(1):25–32. DOI: 10.6180/jase.201803_21(1).0004.
  15. [15] W. Song, C. Cattani, and C.-H. Chi, (2020) “Multifractional Brownian motion and quantum-behaved particle swarm optimization for short term power load forecasting: An integrated approach" Energy 194(C): DOI:10.1016/j.energy.2019.116847.
  16. [16] C. Fan, C. Ding, J. Zheng, L. Xiao, and Z. Ai, (2020) “Empirical mode decomposition based multi-objective deep belief network for short-term power load forecasting" Neurocomputing 388: 110–123. DOI: 10.1016/j.neucom.2020.01.031.
  17. [17] L. Breiman, (1996) “Bagging predictors" Machine learning 24(2): 123–140. DOI: 10 . 1023 / A :1010933404324.
  18. [18] R. T. Guy, P. Santago, and C. D. Langefeld, (2012) “Bootstrap Aggregating of Alternating Decision Trees to Detect Sets of SNP s That Associate With Disease" Genetic epidemiology 36(2): 99–106. DOI: 10.1002/gepi.21608.
  19. [19] S. Yin and J. Bi. “Medical image annotation based on deep transfer learning”. In: 2018 IEEE International Conference on Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData). IEEE, 2018, 47–49. DOI: doi:10.6180/jase.201906_22(2).0020.
  20. [20] B. Choubin, E. Moradi, M. Golshan, J. Adamowski, F. Sajedi-Hosseini, and A. Mosavi, (2019) “An ensemble prediction of flood susceptibility using multivariate discriminant analysis, classification and regression trees, and support vector machines" Science of the Total Environment 651: 2087–2096. DOI: 10.1016/j.scitotenv. 2018.10.064.
  21. [21] L. Teng, H. Li, S. Yin, and Y. Sun, (2019) “Improved krill group-based region growing algorithm for image segmentation" International Journal of Image and Data Fusion 10(4): 327–341. DOI: 10.1080/19479832.2019.1604574.
  22. [22] J.Wang, K. Fang,W. Pang, and J. Sun, (2017) “Wind power interval prediction based on improved PSO and BP neural network" Journal of Electrical Engineering and Technology 12(3): 989–995. DOI: 10.5370/JEET. 2017.12.3.989.
  23. [23] A. Kaur, H. T. C. Pedro, and C. F. M. Coimbra, (2014) “Ensemble re-forecasting methods for enhanced power load prediction" Energy Conversion and Management 80:582–590. DOI: 10.1016/j.enconman.2014.02.004.
  24. [24] Y. Lu, Y. Teng, and H.Wang, (2019) “Load Prediction in Power System with Grey Theory and its Diagnosis of Stabilization" Electric Power Components and Systems 47(6-7): 619–628. DOI: 10.1080/15325008.2019.1587648.
  25. [25] Y. Chen, Z. Zhang, H. Chen, and H. Zheng, (2020) “Robust UC model based on multi-band uncertainty set considering the temporal correlation of wind/load prediction errors" IET Generation, Transmission & Distribution 14(2): 180–190. DOI: 10.1049/iet- gtd.2019. 1439.


    



 

2.1
2023CiteScore
 
 
69th percentile
Powered by  Scopus

SCImago Journal & Country Rank

Enter your name and email below to receive latest published articles in Journal of Applied Science and Engineering.