A Systematic Mathematical Modeling Approach for the Design and Machining of Concave-Arc Ball-End Milling Cutters with Constant Helical Pitch

Shand-Dad Liaw; Wei-Fang  Chen

doi:10.6180/jase.2007.10.1.04

A Systematic Mathematical Modeling Approach for the Design and Machining of Concave-Arc Ball-End Milling Cutters with Constant Helical Pitch

Shand-Dad Liaw This email address is being protected from spambots. You need JavaScript enabled to view it.¹ and Wei-Fang Chen²

¹Department of Mechanical Engineering, De Lin Institute of Technology, Taipei, Taiwan 236, R.O.C.
²Department of Mechanical Engineering, Far East College, Tainan, Taiwan 744, R.O.C.

Received: January 17, 2006
Accepted: July 18, 2006
Publication Date: March 1, 2007

Download Citation: ||https://doi.org/10.6180/jase.2007.10.1.04

ABSTRACT

As the use of NC techniques to machine the freeform and complex surfaces of dies and molds has increased, the demand for revolving helical cutters with specialized geometries has risen. This paper develops a systematic modeling approach for the design and NC machining of concave-arc ball-end milling cutters with a constant helical pitch. The section profile of groove and grinding wheel in the NC machining of the concave-arc ball-end milling cutters with constant pitch are concluded. The cutting edge is defined with a constant pitch and the grinding wheel is specified in terms of the maximum radius of the cutter. By employing the envelope and inverse envelope theories, the sections of grinding wheel and the radial feed, axis feed, and relative displacement of the grinding wheel during NC machining of the cutter are systematically designed. Based on the maximum sectional radius of the cutter, the principles of inverse envelope theory are then employed to establish the sectional profile of the grinding wheel required to produce the designed cutter using a two-axes NC machine. Models are then presented to continue the radial and axial feeding velocities of the grinding wheel during machining, together with its relative displacement. The proposed models are verified via computer simulation and are found to yield satisfactory results. The models presented in this study are intended to supply a general reference for the automatic design and manufacture of helical cutters with a constant pitch.

Keywords: Envelope, Helical Groove, Constant Pitch, Mathematical Model, Cutting Edge

REFERENCES

[1] Wu, C. T. and Chen, C. K., “Study on Rotating Cutters with Different Definitions of Helical Angle,” International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 627638 (2001).
[2] Chen, W. F., Lai, H. Y. and Chen, C. K., “A Precision Tool Model for Concave Cone-End Milling Cutters,” Advanced Manufacturing Technology, Vol. 18, pp. 567578 (2001).
[3] Kaldor, S., Trendler, P. H. H. and Hodgson, T., “Investigation into the Clearance Geometry of End Mills,” Annals of the CIRP, Vol. 33, pp. 133139 (1984).
[4] Kaldor, S., Trendler, P. H. H. and Hodgson, T., “Investigation and Optimization of the Clearance Geometry of End Mills,” Annals of the CIRP, Vol. 34, pp. 153 159 (1985).
[5] Kang, S. K., Ehmann, K. F. and Lin, C., “A CAD Approach to Helical Groove Machining Mathematical Model and Model Solution,” Int. J. Mach. Tools Manufact, Vol. 36, pp. 141153 (1996).
[6] Chen, W. F., Lai, H. Y. and Chen, C. K., “Design and NC Machining of Concave-Arc Ball-end Milling Cutters,” Advanced Manufacturing Technology, Vol. 20, pp. 169179 (2002).
[7] Chen, C. K., Lai, H. Y. and Tang, Y., “A Manufacturing Model of Carbide-Tipped Spherical Milling Cutters,” Proc. Inst. Mechanical Engineers. Part B, Vol. 213, pp. 713724 (1999).
[8] Chen, W. F. and Chen, W. Y., “Design and NC Machining of a Toroid-Shaped Revolving Cutter with a Concave Arc Generator,” Journal of Materials Processing Technology, Vol. 121, pp. 217225 (2002).
[9] Kang, S. K., Ehmann, K. F. and Lin, C., “A CAD Approach to Helical Flute Machining Mathematical Model and Model Solution,” Int. J. Mach. Tools Manufact, Vol. 36, pp. 141153 (1996).
[10] Wu, C. T., Chen, C. K. and Tang, Y. Y., “Modeling and Computer Simulation of Grinding of the Ball End Type Rotating Cutter with a Constant Helical Angle,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 215, pp. 114 (2001).
[11] Tsai, Y. C. and Hsieh, J. M., “A Study of a Design and NC Manufacturing Model of Ball-End Cutters,” Journal of Materials Processing Technology, Vol. 117, pp. 183192 (2001).
[12] Chen, W. F., Lai, H. Y. and Chen, C. K., “Design and NC Machining of Concave-Arc Ball-End Milling Cutters,” Advanced Manufacturing Technology, Vol. 20, pp. 169179 (2002).
[13] Chen, W. Y., Wang, J. C. and Chen, W. F., “A Precision Design and NC Machining of Circular-Arc End-Milling Cutters,” Journal of Materials Processing & Manufacturing Science, Vol. 10, pp.4567 (2001).
[14] Chen, W. F., “A Precision Design for Computer Numerical Machining Models of Involute-Generator Revolving Cutters,” Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 218, pp. 517531 (2004).
[15] Chen, W. Y., Chang, P. C., Liaw, S. D. and Chen, W. F., “A Study of Design and Manufacturing Models for Circular-Arc Ball-End Milling Cutters,” Journal of Materials Processing Technology, Vol. 161(3), pp. 467477 (2005).
[16] Chen, W. F., “A Mathematical Solution to the Design and Manufacturing Problems of Ball-End Cutters having a Cutting Edge with Constant Angle to the Axis,” Journal of Mechanical Engineering Science Proceedings of the Institution of Mechanical Engineers Part C, Vol. 218, pp. 301308 (2004).
[17] Lai, H. Y. and Chen, W. F., “Precision Design and Numerical Control Machining of Tapered Ball-End Milling Cutters,” Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 216, pp. 183197 (2002).
[18] Chen, W. Y., Wang, J. C. and Chen, W. F., “A Precision Design and NC Machining of Circular-Arc End-Milling Cutters,” Journal of Materials Processing & Manufacturing Science, Vol. 10, pp. 4567 (2001).
[19] Lin, S. W., “Study on the 2-Axis NC Machining of a Toroid-Shaped Cutter with a Constant Angle between the Cutting Edge and the Cutter Axis,” Journal of Materials Processing Technology, Vol. 115, pp. 338343 (2001).
[20] Lin, S. W. and Lai, H. Y, “A Mathematical Model for Manufacturing Ball-End Cutter Using A Two-Axis NC Machine,” The International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 881 888 (2001).
[21] Chen, C. K. and Lin, R. Y., “A Study of Manufacturing Models for Ball-End Type Rotating Cutters with Constant Pitch Helical Grooves,” International Journal of Advanced Manufacturing Technology, Vol. 18, pp. 157167 (2001).
[22] Ren, B. Y., Tang, Y. Y. and Chen, C. K., “The General Geometrical Models of the Design and 2-Axis NC Machining of a Helical End-Mill with Constant Pitch,” Journal of Materials Processing Technology, Vol. 115, pp. 265270 (2001).
[23] Wu, C. T. and Chen, C. K., “Manufacturing Models for the Design and NC Grinding of a Revolving Tool with a Circular Arc Generatrix,” Journal of Materials Processing Technology, Vol. 116, pp. 114123 (2001).
[24] Yan, H. S. and Lin, J. Y., “Geometric Design and Machining of Variable Pitch Lead Screws with Cylindrical Meshing Elements,” Trans. of the ASME, J. of Mech. Des, Vol. 115, pp. 490495 (1993).
[25] Lai, H. Y., “A High-Precision Surface Grinding Model for General Ball-End Milling Cutters,” Advanced Manufacturing Technology, Vol. 19, pp. 393402, (2002).
[26] Engin, S. and Altintas, Y., “Mechanics and Dynamics of General Milling Cutters Part I: Helical End Mills,” Machine Tools & Manufacture, Vol. 41, pp. 2195 2212 (2001).
[27] Engin, S. and Altintas, Y., “Mechanics and Dynamics of General Milling Cutters Part II: Inserted Mills,” Machine Tools & Manufacture, Vol. 41, pp. 22132231 (2001).
[28] Kaldor, S., Rafael, A. M. and Messinger, D., “On the CAD of Profiles for Cutters and Helical FlutesGeometrical Aspects,” Ann. of the CIRP, Vol. 37, pp. 5357 (1988).
[29] Sheth, D. S. and Malkin, S., “CAD/CAM for Geometry and Process Analysis of Helical Groove Machining,” Annals of the CIRP, Vol. 39, pp. 129132 (1990).
[30] Kang, S. K., Ehmann, K. F. and Lin, C., “A CAD Approach to Helical Groove Machining Mathematical Model and Model Solution,” Int. J. Mach. Tools Manufacture, Vol. 36, pp. 141153 (1996).