Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

2.10

CiteScore

Volume 8, Issue 3

Capillarity of Rectangular Micro Grooves and Their Application to Heat Pipes

A single drop at rest on a solid surface surrounded by a pure vapor.

Capillarity of Rectangular Micro Grooves and Their Application to Heat Pipes

The Parylene Bowed-Type Valves

Large-scaled straight & bowed plastic straws.

The Parylene Bowed-Type Valves

Micro Capillary Electrophoresis Chips with Sample Pre-concentration Devices Utilizing Alternating Current (AC) Electroosmosis Effect

Electro-polarization and formation of AC electroosmosis flow. The dotted lines represent the flow trace.

Micro Capillary Electrophoresis Chips with Sample Pre-concentration Devices Utilizing Alternating Current (AC) Electroosmosis Effect

Electro-Hydro-Dynamic (EHD) Micropumps with Electrode Protection by Parylene and Gelatin

The cross-section of PDMS microchannel. The w and d are the width and depth of PDMS microchannel.

Electro-Hydro-Dynamic (EHD) Micropumps with Electrode Protection by Parylene and Gelatin

Low Power Consumption Design of Micro-machined Thermal Sensor for Portable Spirometer

Two different designs of Pt thin film thermal anemometer based on a) Bulk silicon and b) back etching structure.

Low Power Consumption Design of Micro-machined Thermal Sensor for Portable Spirometer

Dynamic Responses of a Viscoelastic Material in Nanoscale by Using Harmonic Nanoindentation

Sketch of Indentation profile.

Dynamic Responses of a Viscoelastic Material in Nanoscale by Using Harmonic Nanoindentation

A Droplet-based Device for Triglycerides Colorimetric Measurement

Top view of biochip.

A Droplet-based Device for Triglycerides Colorimetric Measurement

Single-crystalline Silicon on Quartz (SOQ) Wafer by Ultra-low Temperature (100 °C) Wafer Bonding and Thinning Approaches

(a) and (b) showed the thinning results of the bonded wafers.

Single-crystalline Silicon on Quartz (SOQ) Wafer by Ultra-low Temperature (100 °C) Wafer Bonding and Thinning Approaches

The Characterization and Fabrication of Pyroelectric Infrared Sensor

The structure of PIR sensor.

The Characterization and Fabrication of Pyroelectric Infrared Sensor

Design and Fabrication of RF MEMS Switch by the CMOS Process

Schematic of cross-section view of RF switch: (a) in the unactuated state or ‘on’ state; (b) in the actuated state or ‘off’ state.

Design and Fabrication of RF MEMS Switch by the CMOS Process

Tensile Deformation of Tubular Structures of Nitride-based Nanotubes: Brittle and Weak Behavior

Representative GaN nanotubes: (a) (5, 5) armchair nanotube, and (b) (9, 0) zigzag nanotube.

Tensile Deformation of Tubular Structures of Nitride-based Nanotubes: Brittle and Weak Behavior

MEMS Heat Transfer Arnoldi-based Macromodels and the Study of Minimum Required Orders

The CCD picture of the experimental device. The contact pads are on the right side of the picture and are not completely shown.

MEMS Heat Transfer Arnoldi-based Macromodels and the Study of Minimum Required Orders