Test Slice Difference Technique for Low-Transition Test Data Compression

Jiann-Chyi Rau This email address is being protected from spambots. You need JavaScript enabled to view it.¹, Po-Han Wu¹ and Wei-Lin Li¹

¹Department of Electrical Engineering, Tamkang University, Tamsui, Taiwan 251, R.O.C

REFERENCES

1. [1] Hamzaoglu, I. and Patel, J. H., “Test Set Compaction Algorithms for Combinational Circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, pp. 957
   963 (2000).
2. [2] Lee, J. and Touba, N. A., “Combining Linear and Non-Linear Test Vector Compression Using Correlation-Based Rectangular Encoding,” Proceedings of the IEEE VLSI Test Symposium, Berkeley, CA, USA, pp. 252
   257 (2006).
3. [3] Wang, L. T., Wu, C. W. and Wen, X., VLSI Test Principles and Architectures: Design for Testability, San Francisco, CA, USA: Morgan Kaufmann (2006).
4. [4] El-Maleh, A., “Efficient Test Compression Technique Based on Block Merging,” The Institution of Engineering and Technology Computers & Digital Techniques, Vol. 2, pp. 327
   335 (2008a).
5. [5] Hellebrand, S. and Würtenberger, A., “Alternating Run-Length Coding - A Technique for Improved Test Data Compression,” IEEE International Workshop on Test Resource Partitioning, Baltimore, MD, USA (2002).
6. [6] Wu, P. H., Chen, T. T., Li, W. L. and Rau, J. C., “An Efficient Test-Data Compaction for Low Power VLSI Testing,” IEEE International Conference on Electro/ Information Technology, Ames, IA, USA, pp. 237
   241 (2008a).
7. [7] Hamzaoglu, I. and Patel, J. H., “Reducing Test Application Time for Full Scan Embedded Cores,” International Symposium on Fault-Tolerant Computing, Madison, Wisconsin, USA, pp. 260
   267 (1999).
8. [8] Lee, K. J., Chen, J. J. and Huang, C. H., “Broadcasting Test Patterns to Multiple Circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, pp. 1793
   1802 (1999).
9. [9] Gonciari, P. T., Al-Hashimi, B. M. and Nicolici, N., “Variable-Length Input Huffman Coding for Systemon-a-Chip Test,” IEEE Transactions on ComputerAided Design of Integrated Circuits and Systems, Vol. 22, pp. 783
   796 (2003).
10. [10] Jas, A., Ghosh-Dastidar, J., Ng, M. and Touba, N. A., “An Efficient Test Vector Compression Scheme Using Selective Huffman Coding,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 22, pp. 797
    806 (2003).
11. [11] Kavousianos, X., Kalligeros, E. and Nikolos, D., “Multilevel Huffman Coding: An Efficient Test-Data Compression Method for IP Cores,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Sonoma, CA, USA, Vol. 26, pp. 1070
    1083 (2007a).
12. [12] Kavousianos, X., Kalligeros, E. and Nikolos, D., “Optimal Selective Huffman Coding for Test-Data Compression,” IEEE Transactions on Computers, Vol. 56, pp. 1146
    1152 (2007b).
13. [13] Nourani, M. and Tehranipour, M. H., “RL-Huffman Encoding for Test Compression and Power Reduction in Scan Applications,” ACM Transactions on Design Automtion of Electronic Systems, New York, NY, USA Vol. 10, pp. 91
    115 (2005).
14. [14] Tehranipoor, M., Nourani, M. and Chakrabarty, K., “Nine-Coded Compression Technique for Testing Embedded Cores in SoCs,” IEEE Transactions on VLSI Systems, Vol. 13, pp. 719
    731 (2005).
15. [15] Chandra, A. and Chakrabarty, K., “System-on-a-Chip Test-Data Compression and Decompression Architectures Based on Golomb Codes,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 20, pp. 355
    368 (2001a).
16. [16] Chandra, A. and Chakrabarty, K., “Test Data Compression and Test Resource Partitioning for Systemon-a-Chip Using Frequency-Directed Run-Length (FDR) Codes,” IEEE Transactions on Computers, Vol. 52, pp. 1076
    1088 (2003).
17. [17] El-Maleh, A., “Test Data Compression for Systemon-a-Chip Using Extended Frequency-Directed RunLength Code,” The Institution of Engineering and Technology Computers & Digital Techniques, Vol. 2, pp. 155
    163 (2008b).
18. [18] Sinaoglu, O., Bayraktaroglu, I. and Orailoglu, A., “Scan Power Reduction through Test Data Transition Frequency Analysis,” Proceedings of the IEEE International Test Conference, Washington, DC, USA, pp. 844
    850 (2002).
19. [19] Lai, N. C., Wang, S. J. and Fu, Y. H., “Low-Power BIST with a Smoother and Scan-Chain Reorder under Optimal Cluster Size,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Sonoma, CA, USA, Vol. 25, pp. 2586
    2594 (2006).
20. [20] Alpaslan, E., Huang, Y., Lin, X., Cheng, W. T. and Dworak, J., “Reducing Scan Shift Power at RTL,” Proceedings of the IEEE VLSI Test Symposium, San Diego, CA, USA, pp. 139
    146 (2008).
21. [21] Wang, S. and Gupta, S. K., “ATPG for Heat Dissipation Minimization during Test Application,” IEEE Transactions on Computers, Vol. 47, pp. 256
    262 (1998).
22. [22] Tseng, W. D. and Lee, L. J., “Reduction of Power Dissipation during Scan Testing by Test Vector Ordering,” IEEE International Workshop on Microprocessor Test and Verification, Austin, TX, USA, pp. 15
    21 (2007).
23. [23] Badereddine, N., Girard, P., Pravossoudovitch, S., Landrault, C., Virazel, A. and Wunderlich, H. J., “Minimizing Peak Power Consumption during Scan Testing: Test Pattern Modification with X Filling Heuristics,” Proceedings of the IEEE Design and Test of Integrated Systems in Nanoscale Technology, Tunis, Beijing, pp. 359
    364 (2006).
24. [24] Wang, S. J., Li, K. S. M., Chen, S. C., Shiu, H. Y. and Chu, Y. L., “Scan-Chain Partition for High Test-Data Compressibility and Low Shift Power under Routing Constraint,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, pp. 716
    727 (2009).
25. [25] Fang, H., Tong, C. and Cheng, X., “RunBasedReordering: A Novel Approach for Test Data Compression and Scan Power,” Proceedings of the Asia and South Pacific Design Automation Conference, Yokohama, Japan, pp. 732
    737 (2007).
26. [26] Chandra, A. and Chakrabarty, K., “Combining LowPower Scan Testing and Test Data Compression for System-on-a-Chip,” Proceedings of the IEEE Design Automation Conference, Las Vegas, NV, USA, pp. 166
    169 (2001b).
27. [27] Balakrishnan, K. J. and Touba, N. A., “Relationship between Entropy and Test Data Compression,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Sonoma, CA, USA, Vol. 26, pp. 386
    395 (2007).
28. [28] Jas, A. and Touba, N. A., “Test Vector Decompression via Cyclical Scan Chains and Its Application to Testing Core-Based Designs,” Proceedings of the IEEE International Test Conference, Yokohama, Japan, pp. 458
    464 (1998).
29. [29] Synopsys TetraMAX ATPG user guide version x2005.09.
30. [30] Rosinger, P., Gonciari, P., Al-Hashimi, B. and Nicolici, N., “Simultaneous Reduction in Volume of Test Data and Power Dissipation for System-on-a-Chip,” Electronics Letters, Vol. 37, pp. 1434
    1436 (2001).
31. [31] Sankaralingam, R., Oruganti, R. R. and Touba, N. A., “Static Compaction Techniques to Control Scan Vector Power Dissipation,” Proceedings of the IEEE VLSI Test Symposium, Montreal, Que, Canada, pp. 35
    40 (2000).