Trong-Ming Don This email address is being protected from spambots. You need JavaScript enabled to view it.1, Pi-Che Chen1 , Wei-Wei Shang1 and Hsiu-Jung Chiu2 1Department of Chemical and Materials Engineering, Tamkang University, Tamsui, Taiwan 251, R.O.C.
2Department of Chemical and Materials Engineering, Ta Hwa Institute of Technology, Chiunglin, Hsinchu 30703, Taiwan, R.O.C.
Received:
December 4, 2005
Accepted:
December 20, 2005
Publication Date:
September 1, 2006
Download Citation:
||https://doi.org/10.6180/jase.2006.9.3.10
Spherulitic morphology and crystallization kinetics of poly(ethylene oxide)/poly(3- hydroxybutyrate) blends, PEO/P(3HB), were investigated using differential scanning calorimeter (DSC), polarized optical microscope (POM) and scanning electronic microscope (SEM). A single glass transition temperature was observed for all the blends and the Gordon-Taylor equation follows the Tg-composition dependence very well. Furthermore, the melting point of P(3HB) was depressed by the addition of PEO component and from which the interaction parameter χ12 was calculated to be -0.059 using the Nishi-Wang equation. Thus, it can be concluded that P(3HB) and PEO are miscible in the level of molecular mixing. From POM and SEM observations, P(3HB) spherulites exhibit a banded texture due to the twisting of lamellar crystals. The band spacing is almost a constant, ca. 20 μm, when the crystallization temperature is below 90 ºC, at which the maximum growth rate of P(3HB) spherulites occurs. When P(3HB) is blended with PEO, the growth rate of P(3HB) spherulites decreases because of the dilution effect and a decrease in the degree of undercooling. According to the polymer-diluent theory, the nucleation factor Kg and the folded surface free energy σe of P(3HB) crystals are calculated to be 5.648 x 105 K2 and 47.2 erg/cm2 , respectively. Both values decrease when PEO is added.ABSTRACT
Keywords:
Poly(3-hydroxybutyrate), Poly(ethylene oxide), Blends, Spherulite
[19] Avella, M. and Martuscelli, E., “Poly-D-(-)(3-hydroxybutyrate)/Poly(ethylene oxide) Blends: Phase Diagram, Thermal and Crystallization Behaviour”, Polymer, Vol. 29, pp. 17311737 (1988). [20] Avella, M., Martuscelli, E. and Greco, P., “Crystallization Behaviour of Poly(ethylene oxide) from Poly (3-hydroxybutyrate)/Poly(ethylene oxide) Blends. Phase Structuring, Morphology and Thermal Behaviour”, Polymer, Vol. 32, pp. 16471653 (1991). [21] Avella, M., Martuscelli, E. and Raimo, M., “Fractionated Crystallization Phenomenon in Poly(3-hydroxybutyrate) Poly(ethylene oxide) Blends”, Polymer, Vol. 34, pp. 32343240 (1993). [22] You, J.-W., Chiu, H.-J. and Don, T.-M., “Spherulitic Morphology and Crystallization Kinetics of Melt-Miscible Blends of Poly(3-hydroxybutyrate) with Low Molecular Weight Poly(ethylene oxide)”, Polymer, Vol. 44, pp. 43554362 (2003). [23] Nishi, T. and Wang, T. T., “Melting Point Depression and Kinetic Effects of Cooling on Crystallization in Poly (vinylidene fluoride)-Poly(methyl methacrylate) Mixtures”, Macromolecules, Vol. 8, pp. 909 915 (1975). [24] Barham, P. J., Keller, A., Otun, E. L. and Holmes, P. A., “Crystallization and Morphology of a Bacterial Thermoplastic: Poly-3-hydroxybutyrate”, J. Mater. Sci., Vol. 19, pp. 27812794 (1984). [25] Schultz, J. M., “Transient Effects in Crystallization of Polyethylene”, J Polymer Science- Polymer Physics, Vol. 7, pp. 821827 (1969). [26] Xu, J., Guo, B.-H., Zhang, Z.-M., Zhou, J.-J., Jiang, Y., Yan, S., Li, L.,Wu, Q., Chen, G.-Q. and Schultz, J. M., “Direct AFM Observation of Crystal Twisting and Organization in Banded Spherulites of Chiral Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)”, Macromolecules, Vol. 37, pp. 41184123 (2004). [27] Hobbs, J. K., McMaster, T. J., Miles, M. J. and Barham, P. J., “Cracking in Spherulites of Poly(hydroxybutyrate)”, Polymer, Vol. 37, pp. 32413246 (1996). [28] Chiu, H. J. and You, J.-W., “Lamellar Morphology of Poly(3-hydroxybutyrate)/Poly(ethylene oxide) Blends as Studied via Small Angle X-ray Scattering”, J. Polym. Res., Vol. 10, pp. 7985 (2003). [29] Lotti, N., Pizzoli, M., Ceccoru, I. G. and Scandola, M., “Binary Blends of Microbial Poly(3-hydroxybutyrate) with Polymethacrylates”, Polymer, Vol. 34, pp. 4935 4940 (1993). [30] Pearce, R. P. and Marchessault, R. H., “Melting and Crystallization in Bacterial Poly(-hydroxyvalerate), PHV, and Blends with Poly(-hydroxybutyrate-cohydroxyvalerate)”, Macromolecules, Vol. 27, pp. 38693874 (1994). [31] Hoffman, J. D., “Regime III Crystallization in Meltcrystallized Polymers: the Variable Cluster Model of Chain Folding”, Polymer, Vol. 24, pp. 326 (1983). [32] Cimmino, S., Martuscelli, E., Silvestre, C., Canetti, M., de Lalla, C. and Seves, A., “Poly(ethylene oxide)/ Poly(ethyl methacrylate) Blends: Crystallization, Melting Behavior, and Miscibility”, J. Polym. Sci., Polym. Phys., Vol. 27, pp. 17811794 (1989). [33] Talibuddin, S., Wu, L., Runt, J. and Lin, J. S., “Microstructure of Melt-miscible, Semicrystalline Polymer Blends”, Macromolecules, Vol. 29, pp. 75277535 (1996).REFERENCES
