Electro-Mechanical Engineering

N.H. TranThis email address is being protected from spambots. You need JavaScript enabled to view it.1, T.T.N. Nguyen1, D.T. Pham2, and H.T. Trieu2 

1Le Quy Don Technical University, Institue of Technique for Special Engineering, Hanoi, Viet Nam
2Hanoi University of Mining and Geology, Hanoi, Viet Nam

      

 

Received: October 3, 2022
Accepted: January 29, 2023
Publication Date: March 23, 2023

 Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.


Download Citation: ||https://doi.org/10.6180/jase.202312_26(12).0002  


Deep geological disposal facility has been considered as the most appropriated solution for the safe long term management of high-level radioactive waste (HLW). Geologic disposal solution consists of isolating the radioactive waste from the biosphere. Argillaceous rock has been selected in several countries as host formation due to its favorable properties to isolate radionuclides and chemical contaminants (very low permeability, stable, high retention capacity, self-sealing, etc). Clays in their natural state is usually saturated. Disposal of the exothermic waste packages in the repository leads to an increase in temperature within the host rock, which induces the pore pressure build-up due to the difference in thermal expansion coefficients of the pore water and the solid skeleton. The excess pore pressure generally leads to a decrease in the effective stress and can provoke thermally hydraulic fracturing or shear failure. Therefore, understanding the thermo-hydro-mechanical (THM) responses of the saturated host rock due to the heat generated form waste packages is a key issue to assess the feasibility of the repository. This paper aims at presenting coupled THM constitutive equations for a saturated porous medium and its finite element (FEM) discretization and solution. The solution is validated against analytical solution and other numerical results from a benchmark within an international project. FEM program is then used to describe the THM behavior of the host rock around a HLW repository (i.e. near field responses). Sensitivity analysis were performed to evaluate effect of material anisotropy and hydraulic condition on the micro-tunnel wall.


Keywords: THM coupling, geological radioactive waste disposal facility, clay, excess pore pressure, thermal pressurization, transversely isotropy


  1. [1] OECD Nuclear Energy Agency and OECD Nuclear Energy Agency. Radioactive Waste Management Committee. Geological Disposal of Radioactive Waste: Review of Developments in the Last Decade. Nuclear Energy Agency, Organisation for Economic Cooperation and Development, 2000.
  2. [2] R. G. Campanella and J. K. Mitchell, (1968) “Influence of temperature variations on soil behavior" Journal of the Soil Mechanics and Foundations Division 94(3):709–734.
  3. [3] M.-N. Vu, G. Armand, and C. Plua, (2020) “Thermal pressurization coefficient of anisotropic elastic porous media" Rock Mechanics and Rock Engineering 53(4): 2027–2031.
  4. [4] M. Monfared, P. Delage, J. Sulem, M. Mohajerani, and A. Tang. “Pressurisation thermique dans l’argile de Boom”. In: Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering. 2013.
  5. [5] M. Monfared, J. Sulem, P. Delage, and M. Mohajerani, (2011) “A laboratory investigation on thermal properties of the Opalinus claystone" Rock Mechanics and Rock Engineering 44(6): 735.
  6. [6] M. Mohajerani, P. Delage, J. Sulem, M. Monfared, A. M. Tang, and B. Gatmiri, (2012) “A laboratory investigation of thermally induced pore pressures in the Callovo-Oxfordian claystone" International Journal of Rock Mechanics and Mining Sciences 52: 112–121.
  7. [7] P. Braun, P. Delage, S. Ghabezloo, B. Chabot, N. Conil, and M.-N. Vu, (2022) “Inducing tensile failure of claystone through thermal pressurization in a novel triaxial device" Rock Mechanics and Rock Engineering 55(7): 3881–3899.
  8. [8] F. Bernier and B. Neerdael, (1996) “Overview of in-situ thermomechanical experiments in clay: Concept, results and interpretation" Engineering geology 41(1-4): 51–64.
  9. [9] D. De Bruyn and S. Labat, (2002) “The second phase of ATLAS: the continuation of a running THM test in the HADES underground research facility at Mol" Engineering Geology 64(2-3): 309–316.
  10. [10] A. Dizier, G. Chen, J. Verstricht, X. Li, X. Sillen, and S. Levasseur, (2021) “The large-scale in situ PRACLAY heater test: First observations on the in situ thermo-hydromechanical behaviour of Boom Clay" International Journal of Rock Mechanics and Mining Sciences 137:104558.
  11. [11] H. Kull, N. Jockwer, C.-L. Zhang, Y. Wileveau, and S. Pepa, (2007) “Measurement of thermally-induced porewater pressure increase and gas migration in the Opalinus Clay at Mont Terri" Physics and Chemistry of the Earth, Parts A/B/C 32(8-14): 937–946.
  12. [12] M. Jobmann and M. Polster, (2007) “The response of Opalinus clay due to heating: A combined analysis of in situ measurements, laboratory investigations and numerical calculations" Physics and Chemistry of the Earth, Parts A/B/C 32(8-14): 929–936.
  13. [13] G. Armand, F. Bumbieler, N. Conil, R. de La Vaissière, J. Bosgiraud, and M. Vu, (2017) “Main outcomes from in situ THM experiments programme to demonstrate feasibility of radioactive HL-ILW disposal in the Callovo- Oxfordian claystone" J Rock Mech Geotech Eng 9(3): 415–427.
  14. [14] F. Bumbieler, C. Plúa, S. Tourchi, M.-N. Vu, J. Vaunat, A. Gens, and G. Armand, (2021) “Feasibility of constructing a full-scale radioactive high-level waste disposal cell and characterization of its thermo-hydro-mechanical behavior" International Journal of Rock Mechanics and Mining Sciences 137: 104555.
  15. [15] S. Tourchi, J. Vaunat, A. Gens, F. Bumbieler, M.-N. Vu, and G. Armand, (2021) “A full-scale in situ heating test in Callovo-Oxfordian claystone: observations, analysis and interpretation" Computers and Geotechnics 133: 104045.
  16. [16] N. Conil, M. Vitel, C. Plua, M. N. Vu, D. Seyedi, and G. Armand, (2020) “In situ investigation of the THM behavior of the Callovo-Oxfordian claystone" Rock Mechanics and Rock Engineering 53: 2747–2769.
  17. [17] C. Plúa, M.-N. Vu, D. M. Seyedi, and G. Armand, (2021) “Effects of inherent spatial variability of rock properties on the thermo-hydro-mechanical responses of a highlevel radioactive waste repository" International Journal of Rock Mechanics and Mining Sciences 145: 104682.
  18. [18] C. Plúa, M.-N. Vu, G. Armand, J. Rutqvist, J. T. Birkholzer, H. Xu, R. Guo, K. E. Thatcher, A. E. Bond, W. Wang, T. Nagel, H. Shao, and O. Kolditz, (2021) “A reliable numerical analysis for large-scale modelling of a high-level radioactive waste repository in the Callovo- Oxfordian claystone" International Journal of Rock Mechanics and Mining Sciences 140: 104574.
  19. [19] D. Seyedi, G. Armand, N. Conil, M. Vitel, and M.-N. Vu. “On the thermo-hydro-mechanical pressurization in Callovo-Oxfordian claystone under thermal loading”. In: Poromechanics VI. 2017, 754–761.
  20. [20] M. Vu, D. Seyedi, and G. Armand. “Thermo-poromechanical coupled processes during thermal pressurization around nuclear waste repository”. In: COUPLED VI: proceedings of the VI International Conference on Computational Methods for Coupled Problems in Science and Engineering. CIMNE. 2015, 1251–1260.
  21. [21] S. Ghabezloo, (2011) “Micromechanics analysis of thermal expansion and thermal pressurization of a hardened cement paste" Cement and Concrete Research 41(5): 520–532.
  22. [22] S. Ghabezloo and J. Sulem, (2009) “Stress dependent thermal pressurization of a fluid-saturated rock" Rock Mechanics and Rock Engineering 42: 1–24.
  23. [23] A. W. Rempel and J. R. Rice, (2006) “Thermal pressurization and onset of melting in fault zones" Journal of Geophysical Research: Solid Earth 111(B9):
  24. [24] J. Sulem, P. Lazar, and I. Vardoulakis, (2007) “Thermoporo-mechanical properties of clayey gouge and application to rapid fault shearing" International journal for numerical and analytical methods in geomechanics 31(3): 523-540.
  25. [25] L. Zhou, Z. Zhu, X. Xie, and Y. Hu, (2022) “Coupled thermal–hydraulic–mechanical model for an enhanced geothermal system and numerical analysis of its heat mining performance" Renewable Energy 181: 1440–1458.
  26. [26] J. R. Booker and C. Savvidou, (1985) “Consolidation around a point heat source" International Journal for Numerical and Analytical Methods in Geomechanics 9(2): 173–184.
  27. [27] L. Hai-an, Z. Long-peng, L. Jiong-feng, and C. Xinjun. “Study on Thermo-Mechanical Coupling Characteristics of Surrounding Rock of HLW Disposal Repository in Clay Rock”. In: IOP Conference Series: Earth and Environmental Science. 570. 5. IOP Publishing.2020, 052047.
  28. [28] O. Coussy. Poromechanics. John Wiley & Sons, 2004.
  29. [29] I. Guide, (1998) “Comsol Multiphysics" 5.6, COMSOL AB: 204–8.
  30. [30] J. Rutqvist, (2017) “An overview of TOUGH-based geomechanics models" Computers & Geosciences 108: 56–63.
  31. [31] O. Kolditz, S. Bauer, L. Bilke, N. Böttcher, J.-O. Delfs, T. Fischer, U. J. Görke, T. Kalbacher, G. Kosakowski, C. McDermott, et al., (2012) “OpenGeoSys: an opensource initiative for numerical simulation of thermo-hydromechanical/chemical (THM/C) processes in porous media" Environmental Earth Sciences 67: 589–599.
  32. [32] A. A. Chaudhry, J. Buchwald, O. Kolditz, and T. Nagel, (2019) “Consolidation around a point heat source (correction and verification)" International Journal for Numerical and Analytical Methods in Geomechanics 43(18): 2743–2751.
  33. [33] C. D. C.-C. Levels. Engineeringtoolbox. com. 2019.
  34. [34] R. T. Fernandez. “Natural convection from cylinders buried in porous media". (PhD Thesis). University of California, Berkeley, 1972.
  35. [35] E. O. Holzbecher. Modeling density-driven flow in porous media: principles, numerics, software. Springer Science & Business Media, 1998.
  36. [36] E. d. C. Andrade, (1930) “The viscosity of liquids" Nature 125(3148): 309–310.
  37. [37] N. H. Tran. “Hydro-mechanical behavior of deep tunnels in anisotropic poroelastic medium". (PhD Thesis). Université d’Orléans, 2016.
  38. [38] M. A. Mánica, A. Gens, J. Vaunat, G. Armand, and M.-N. Vu, (2022) “Numerical simulation of underground excavations in an indurated clay using non-local regularisation. Part 1: formulation and base case" Géotechnique 72(12): 1092–1112.
  39. [39] Z. Yu, J. Shao, G. Duveau, M.-N. Vu, and G. Armand, (2021) “Numerical modeling of deformation and damage around underground excavation by phase-field method with hydromechanical coupling" Computers and Geotechnics 138: 104369.

Latest Articles

Dynamic Analysis of the UHPFRC High-rise Building under High Explosion using Coupled Eulerian-Lagrangian Approach
Dynamic Analysis of the UHPFRC High-rise Building under High Explosion using Coupled Eulerian-Lagrangian ApproachVolume 28, Issue 2 (In Press)

Read more: ...

NSGA-II Algorithm-Based Wide Area Measurement (WAMS) Allocation with Considering Reliability
NSGA-II Algorithm-Based Wide Area Measurement (WAMS) Allocation with Considering ReliabilityVolume 28, Issue 2 (In Press)

Read more: ...

Predicting Demand for Emergency Ambulance Services: A Comparative Approach
Predicting Demand for Emergency Ambulance Services: A Comparative ApproachVolume 27, Issue 10

Read more: ...

Multi-level Semantic Fusion Network for Few-shot Multimedia Image Recognition in Education Management
Multi-level Semantic Fusion Network for Few-shot Multimedia Image Recognition in Education ManagementVolume 28, Issue 2 (In Press)

Read more: ...

River bank erosion prediction using multivariable linear regression
River bank erosion prediction using multivariable linear regressionVolume 27, Issue 12 (In Press)

Read more: ...

Optimization of Ultrasound-Assisted Pectin Extraction from Durian Rind
Optimization of Ultrasound-Assisted Pectin Extraction from Durian RindVolume 28, Issue 2 (In Press)

Read more: ...

Short-time prediction model for cross-section passenger flow in urban transit trains using GCN-AM-BiLSTM
Short-time prediction model for cross-section passenger flow in urban transit trains using GCN-AM-BiLSTMVolume 28, Issue 2 (In Press)

Read more: ...

Response Prediction Analysis of RC Frame Structures Using Support Vector Machine Algorithm
Response Prediction Analysis of RC Frame Structures Using Support Vector Machine AlgorithmVolume 28, Issue 2 (In Press)

Read more: ...

Using the non-dominated sorting genetic algorithm II for multi-objective optimization of acoustic performance in sandwich panels with cellular honeycomb core
Using the non-dominated sorting genetic algorithm II for multi-objective optimization of acoustic performance in sandwich panels with cellular honeycomb coreVolume 28, Issue 2 (In Press)

Read more: ...