Baoge Zhang This email address is being protected from spambots. You need JavaScript enabled to view it.1, Rui Sun1, Zhen Zhang1, Yao Rong1, and Yuemin Jiao1

1School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China


 

Received: July 29, 2021
Accepted: October 2, 2021
Publication Date: November 1, 2021

 Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.


Download Citation: ||https://doi.org/10.6180/jase.202208_25(4).0004  


ABSTRACT


Due to the continuous maturity of flexible DC transmission technology, DC transmission has become more popular. As a key part of the DC power network, the importance of high-voltage DC circuit breaker (DCCB) is self-evident. For the existing problems in DCCB, such as the large number of inputs leading to high cost, excessive current during short-circuit faults, and excessive energy absorption by surge arresters, a new current limiting multi-port high-voltage DC circuit breaker topology (MP-DCCB) is proposed. By the process of improving the DCCB topology structure, carrying out theoretical analysis of the current limiting and breaking processes of the new MP-DCCB, offering the relevant parameters of the device and the selection basis, the corresponding simulation model made by PSCAD software is finally constructed. Comparing the simulation results with the existing DCCB scheme, the new MP-DCCB has the advantages of suppressing the magnitude of fault current, reducing the energy consumed by the surge arrester, and shortening the shutdown time of the surge arrester and shut down the current. Therefore, the new MP-DCCB has good reliability and economy, and the simulation results verify that the proposed scheme topology can be applied to the current DC power network.


Keywords: DC network, multi-port high-voltage DC circuit breaker, current-limiting branch cir-cuit, grounding branch circuit, short-circuit fault, surge arrester


REFERENCES


  1. [1] G. Tang, H. Pang, Z. He, et al., (2016) “R&D and application of advanced power transmission technology in China" Proceedings of the CSEE 36(7): 1760–1771.
  2. [2] Y. Zhang, Y. Luo, and Y. Hong, (2021) “Multi-port DC circuit breaker-based fault clearing scheme for LCC-VSC hybrid multi-terminal HVDC systems" Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control 49(4): 146–153. DOI: 10.19783/j.cnki.pspc.200463.
  3. [3] Z.Wang, Q. Tian, L. Cheng, and G. Li, (2019) “Transient breaking characteristics and its parameter influence analysis of hybrid DC circuit breaker" Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control 47(18): 1–10. DOI: 10.19783/j.cnki.pspc.181229.
  4. [4] Z. Peng, J.Wei, J. Zhao, T. Li, X. Jing, J. Su, Y. Hu, Y. Li, and F. Yuan, (2019) “Operation mode research on parallel multi-terminal HVDC transmission system" Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control 47(16): 180–187. DOI: 10.19783/j.cnki.pspc.181206.
  5. [5] Q. Huang, G. Zou, L. Gao, and C. Sun, (2018) “Review on DC Transmission Line Protection Technologies of HB-MMC Based DC Grids" Dianwang Jishu/Power System Technology 42(9): 2830–2840. DOI: 10.13335/j.1000-3673.pst.2017.2593.
  6. [6] W.Wang, (2019) “Research and application of real-time simulation technology for UHVDC control and protection system" Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control 47(15): 142–147. DOI:10.19783/j.cnki.pspc.170324.
  7. [7] X. Guo, Y. Zhou, N. Mei, and B. Zhao, (2018) “Construction and Characteristic Analysis of Zhangbei Flexible DC Grid" Dianwang Jishu/Power System Technology 42(11): 3698–3707. DOI: 10.13335/j.1000-3673.pst.2017.2461.
  8. [8] Y.Wang, X. Zhang, Y. Xu, Y. Huang, Y. Ye, X. Ma, Z. Li, and Y.Wu, (2021) “Protection scheme for a bipolar DC microgrid based on the operation sequence of DC circuit breakers" Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control 49(4): 81–88. DOI: 10.19783/j.cnki.pspc.200555.
  9. [9] Z. Chen, Z. Yu, X. Zhang, T. Wei, G. Lyu, L. Qu, Y. Huang, and R. Zeng, (2018) “Analysis and Experiments for IGBT, IEGT, and IGCT in Hybrid DC Circuit Breaker" IEEE Transactions on Industrial Electronics 65(4): 2883–2892. DOI: 10.1109/TIE.2017.2764863.
  10. [10] T. Zhu, Z. Yu, R. Zeng, G. Lü, Z. Chen, X. Zhang, Y. Zhao, M. Chen, Y. Huang, and W. Wen, (2016) “Transient model and operation characteristics researches of hybrid DC circuit breaker" Proc. CSEE 36(1): 18–30.
  11. [11] D. Keshavarzi, E. Farjah, and T. Ghanbari, (2018) “Hybrid DC Circuit Breaker and Fault Current Limiter with Optional Interruption Capability" IEEE Transactions on Power Electronics 33(3): 2330–2338. DOI:10.1109/TPEL.2017.2690960.
  12. [12] X. Wei, B. Yang, Z. He, Y. Gao, L. Chen, and J. Ke, (2016) “Control strategy and physical dynamic simulation of cascaded full-bridge DC circuit breaker" Automation of Electric Power Systems 40(1): 129–135.
  13. [13] Wei, D. Shi, B. Cao,W. Yang,W. Lu,Wang, and B. Liu, (2018) “500 kV Commutation-based Hybrid HVDC Circuit Breaker" Automation of Electric Power System 42(7): 102–107. DOI: 10.7500/AEPS20170531001.
  14. [14] G. Liu, F. Xu, Z. Xu, Z. Zhang, and G. Tang, (2017) “Assembly HVDC breaker for HVDC grids with modular multilevel converters" IEEE Transactions on Power Electronics 32(2): 931–941. DOI: 10.1109/TPEL.2016.2540808.
  15. [15] E. Kontos, T. Schultz, L. Mackay, L. M. Ramirez-Elizondo, C. M. Franck, and P. Bauer, (2017) “Multiline breaker for HVdc applications" IEEE Transactions on Power Delivery 33(3): 1469–1478.
  16. [16] K. Saleh, A. Hooshyar, and E. El-Saadany, (2019) “Ultra-high-speed traveling-wave-based protection scheme for medium-voltage DC microgrids" IEEE Transactions on Smart Grid 10(2): 1440–1451. DOI: 10.1109/TSG.2017.2767552.
  17. [17] W. Wang, M. Barnes, O. Marjanovic, and O. Cwikowski, (2016) “Impact of DC breaker systems on multiterminal VSC-HVDC stability" IEEE Transactions on Power Delivery 31(2): 769–779. DOI: 10.1109/TPWRD.2015.2409132.
  18. [18] Y. Xu, Y. Xie, W. Lü, W. Wang, and B. Yang, (2020) “Design of Power Supply System in Hybrid HVDC Circuit Breaker" Gaodianya Jishu/High Voltage Engineering 46(11): 3856–3863. DOI: 10.13336/j.1003-6520.hve.20200528020.
  19. [19] D. Jiang, C. Zhang, H. Zheng, L. Ye, and Y. Yan, (2014) “A scheme for current-limiting hybrid DC circuit breaker" Dianli Xitong Zidonghua/Automation of Electric Power Systems 38(4): 65–71. DOI: 10.7500/AEPS20130624006.
  20. [20] H. Wang, C. Ma, Q. Hao, and G. Han, (2019) “Scheme of Hybrid High Voltage DC Circuit Breaker with Forced Current Commutation" Gaodianya Jishu/High Voltage Engineering 45(8): 2425–2433. DOI: 10.13336/j.1003-6520.hve.20190731009.
  21. [21] N. Han, X. Jia, X. Zhao, J. Xu, and C. Zhao, (2019) “A Novel Hybrid DC Fault Current Limiter Topology" Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 39(6): 1647–1658. DOI: 10.13334/j.0258-8013.pcsee.180469.