Wanzhi Zhang1,2, Tao Zhang2, Fulin Tian2, Gongpu Wang1, Wanshuai Wang2, Shuaichen Wu2, and Lianglong Hu This email address is being protected from spambots. You need JavaScript enabled to view it.1
1Nanjing Research Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China 2College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai’an 271018, China
Received: June 6, 2021 Accepted: September 21, 2021 Publication Date: October 25, 2021
Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.
At present, all most sweet potato crushing machineries are improved based on potato seedling killer or straw crushing and returning machine, and adopt single-roller mulch type seedling killing structure, and there are problems such as low crushing qualification rate of ridge vines, easy entanglement of stalks and high damage rate. This not only requires manual further removal of the vines, but also the damaged sweet potato cannot be stored, which affects the yield. To solve the problems, a double-roller sweet potato vine crushing and returning machine with the structure of the front roller picking and the back roller crushing was designed. The Box-Behnken test design method was adopted to establish a quadratic regression model that took the picking roller speed, the cutter roller speed and the ground clearance as the test factors, and the vines breaking qualified rate, the stubble height, and the sweet potato damage rate as evaluating indicator. The analysis of the influence of interactive factors showed that the contribution rate of each factor to the vines breaking qualified rate was picking roller speed> cutter roller speed > ground clearance; the contribution rate of each factor to the stubble height was ground clearance> pickling roller speed > cutter roller speed; the contribution rate of various factors to the sweet potato damage rate was ground clearance> cutter roller speed > pickling roller speed. The optimization results showed that when the picking roller speed was 631 r/min, the cutter roller speed was 1906 r/min, and the ground clearance was 21 mm, the vines breaking qualified rate was 96.2%, the stubble height was 28.8 mm, and the sweet potato damage rate was 0.16%. The research results can provide new test schemes and complete design parameters for sweet potato vine crushing operations.
Keywords: Sweet potato vine, Design, Orthogonal experiment, Model optimization, Test
REFERENCES
[1] D. Ma, Q. Li, Q. Cao, F. Niu, Y. Xie, J. Tang, H. Li, et al., (2012) “Development and prospect of sweet potato industry and its technologies in China." Jiangsu journal of agricultural sciences 28(5): 969–973. DOI: CNKI:SUN:JSNB.0.2012-05-011..
[2] S. Zhihao, H. Lianglong, W. Nu, et al., (2015) “Potato and sweet potato planting and its harvest machinery" Journal of Agricultural Mechanization Research 37(4): 265–268. DOI: 10.3969/j.issn.1003-188X.2015.04.061..
[3] X. Wang, M. Zhang, and T. Mu, (2012) “Process optimization on alcohol production using sweet potato residue by simultaneous saccharification and fermentation method" Transactions of the Chinese Society of Agricultural Engineering 28(14): 256–261. DOI: 10.3969/j.issn.1002-6819.2012.14.039..
[4] L.-l. HU, Z.-c. HU, B. WANG, L.-j. TIAN, F.-l. JI, and X.-t. YU, (2012) “Research Development and Trend of Sweet Potato (Ipomoea Batatas Lam.) Production Mechanization in China [J]" Chinese Agricultural Mechanization 2: DOI: 10.3969/j.issn.1006-7205.2012.02.004..
[5] S. Gongwei,W. Gongpu, H. Lianglong, et al., (2019) “Development of harvesting mechanism for stem tips of sweet potatoes" Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE) 35(19): 46–55. DOI: 10.11975/j.issn.1002-6819.2019.19.006..
[6] L. Hu, B. Wang, G. Wang, Z. Yu, Z. You, Z. Hu, B. Wang, and X. Gao, (2016) “Design and experiment of type 2ZGF-2 duplex sweet potato transplanter" Transactions of the Chinese Society of Agricultural Engineering 32(10): 8–16. DOI: 10.11975/j.issn.1002-6819.2016.10.002..
[7] Y. Z.-Y. W. X.-G. Q. J.-Z. Dai, (2018) “Breeding innovation and development of sweet potato industry" Jiangsu Journal of Agricultural Sciences:
[8] D. ZHAO and Z. GAO, (2012) “Research on the Development in the Sweet Potato Stem Leaves Treatment and Harvesting Machines at Home and Abroad" Agricultural Science&Technology and Equipment 6: DOI: 10.3969/j.issn.1674-1161.2012.06.011..
[9] Y. W. Z. H. Y. L. Bing, (2018) “Present situation of research and expectation on plant mechanization of sweet potato in China and abroad" Journal of Chinese Agricultural Mechanization: DOI: 10.13733/j.jcam.issn. 2095-5553.2018.02.003..
[10] G. J. L. L. L. L. Fei, (2015) “Contrast Test of Sweet Potato Mechanized Cutting Seedling Vine" Agricultural Engineering: DOI: 10.3969/j.issn.2095-1795.2015.z2.003..
[11] M. G. X. X. Z.W. Xin, (2019) “Design and Experiment of Knife Roller and Throwing Device for Sweet Potato Vine Recycling Machine" Transactions of the Chinese Society for Agricultural Machinery: DOI: 10.6041/j.issn.1000-1298.2019.12.006..
[12] L. Jinqing, S. Qinqin, Y. Ying, L. Zihui, L. Jicheng, and L. Zhongyuan, (2016) “Design optimization andnexperiment on potato haulm cutter" Transactions of the Chinese Society for Agricultural Machinery 47(5): 106–114. DOI: 10.6041/j.issn.1000-1298.2016.05.015..
[13] X. Zhang, Z. Wang, Y. Li, and D. Liang, (2018) “Design and experiment of sliding-cutting and anti-twining returning device for banana straw" Transactions of the Chinese Society of Agricultural Engineering 34(3):26–34.
[14] Z. ZHANG, J. HE, H. LI, Q. WANG, J. JU, and X. YAN, (2017) “Design and experiment on straw chopper cum spreader with adjustable spreading device" Transactions of the Chinese Society for Agricultural Machinery: 09. DOI: 10.6041/j.issn.1000-1298.2017.09.010..
[15] W. Teng, H. Lianglong, W. Gongpu, et al., (2017) “Design and test of walking sweet potato (Ipomoea batatas) vines crushing and returning machine" Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE) 33(16): 8–17. DOI:10.11975/j.issn.1002-6819.2017.16.002.
We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.
