Shudong He 1, Youduo Peng 1, Yongping Jin1, Xiong Shu2, and BuyanWan1
1National-Local Joint Engineering Laboratory of Marine Resources Exploration Equipment and Safety Technology, Hunan University of Science and Technology, Xiangtan 411201, China. 2School of Mechanical Engineering, Hunan University of Science and Technology, Hunan, Xiangtan, 411201, China
Received: March 10, 2021 Accepted: July 11, 2021 Publication Date: July 19, 2021
Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.
Seabed sediment samples are vital to the study of marine geology, microbial communities, and the history of life on earth, and pressure-retaining samplers are fundamental to obtaining sediment samples while maintaining in situ conditions. Due to the harsh environment, with extremely high pressures, low temperatures, and no light, samplers can easily fail as structural components are stressed beyond their limits. Therefore, it is essential to develop a pressure-retaining sampler with high reliability. In this paper, a sediment sampler that we developed was used as the research object. A fault tree model of the sampler was established using the fault tree analysis method, and the failure rate, reliability, and importance index of each component in the sampler were calculated under different working conditions. The results showed that the sampler’s O-ring seals were the component most likely to fail, with failure rates as high as 29.86. Furthermore, as operational time increased, the reliability of the sampler gradually decreased. Under ultra-high pressure, the reliability index decreased from 90.97 % after running for 1000 hours to 35.30 % after running for 11000 hours. These new discoveries have provided important insight for increasing the robustness of the design and establishing maintenance priorities for samplers to ensure high reliability.
Keywords: Deep-sea Sampler; Pressure-retaining; Reliability; Fault Tree Model; Failure Rates
REFERENCES
[1] J. S. Chung. “Deep-ocean mining technology III: Developments”. In: Eighth ISOPE Ocean Mining Symposium. OnePetro. 2009.
[2] R. Sharma, (2011) “Deep-sea mining: Economic, technical, technological, and environmental considerations for sustainable development" Marine Technology Society Journal 45(5): 28–41.
[3] X. Wen, (2000) “Current situation and future prospect of Marine geology" Ocean Bulletin 19: 66–72.
[4] G. Wang, (1998) “The new century of ocean drilling and Marine geology" Geology of China 19: 23–31.
[5] A. Mogg, K. Attard, H. Ståhl, T. Brand, R. Turnewitsch, and M. Sayer, (2017) “The influence of coring method on the preservation of sedimentary and biogeochemical features when sampling softbottom, shallow coastal environments" Limnology and Oceanography-methods 15: 905–915.
[6] S. He, Y. Peng, Y. Jin, B.Wan, and G. Liu, (2020) “Review and Analysis of Key Techniques in Marine Sediment Sampling" Chinese Journal of Mechanical Engineering 33(1): 66. DOI: 10.1186/s10033-020-00480-0.
[7] K. Abid, G. Spagnoli, C. Teodoriu, and G. Falcone, (2015) “Review of pressure coring systems for offshore gas hydrates research" Underwater Technology 33(1):19–30. DOI: 10.3723/ut.33.019.
[8] K. Yamamoto, (2015) “Overview and introduction: Pressure core-sampling and analyses in the 2012¨C2013 MH21 offshore test of gas production from methane hydrates in the eastern Nankai Trough" Marine and Petroleum Geology 66: 296–309.
[9] S. Blomqvist, (1991) “Quantitative sampling of softbottom sediments: problems and solutions" Marine EcologyProgress Series 72(3): 295–304.
[10] Y. Kubo, Y. Mizuguchi, F. Inagaki, and K. Yamamoto, (2014) “A new hybrid pressure-coring system for the drilling vessel Chikyu" Scientific Drilling 17: 37–43.DOI: 10.5194/sd-17-37-2014.
[11] L. M. Peoples, M. Norenberg, D. Price, M. Mc-Goldrick, M. Novotny, A. Bochdansky, and D. H. Bartlett, (2019) “A full-ocean-depth rated modular lander and pressure-retaining sampler capable of collecting hadal-endemic microbes under in situ conditions" Deep Sea Research Part I: Oceanographic Research Papers 143: 50–57.
[12] L. D. JIN YongpingWAN Buyan, (2019) “Reliability Analysis and Experimental for Key Component of Launch and Recovery Equipment of Seafloor Drill" Journal of Mechanical Engineering 55(8): 183. DOI: 10.3901/JME.2019.08.183.
[13] F. Yin, S. Nie, H. Ji, and Y. Huang, (2018) “Nonprobabilistic reliability analysis and design optimization for valve-port plate pair of seawater hydraulic pump for underwater apparatus" Ocean Engineering 163: 337–347. DOI: https://doi.org/10.1016/j.oceaneng.2018.06.007.
[14] Ø. Sætre. “Reliability assessment of subsea BOP control systems". (mathesis). NTNU, 2015.
[15] K. Zhang, H. Huang, M. Duan, Y. Hong, and S. F. Estefen, (2017) “Theoretical investigation of the compression limits of sealing structures in complex load transferring between subsea connector? components" Journal of Natural Gas Science and Engineering 44: 202–213. DOI: https://doi.org/10.1016/j.jngse.2017.03.034.
[16] P. Nan, J. Peng,W. Liquan, Y. Feihong, Z. Ning, and L. Pu, (2019) “Reliability analysis of subsea connectors structure" Journal of Harbin Engineering University 42: 68–73.
[17] D. Chen, Y. Fan, W. Li, Y. Wang, and S. Zhang, (2019) “Human reliability prediction in deep-sea sampling process of the manned submersible" Safety Science 112: 1–8. DOI: https://doi.org/10.1016/j.ssci.2018.10.001.
[18] I.-H. Choi and D. Chang, (2016) “Reliability and availability assessment of seabed storage tanks using fault tree analysis" Ocean Engineering 120: 1–14. DOI: https://doi.org/10.1016/j.oceaneng.2016.04.021.
[19] S. Naval. Handbook of Reliability Prediction Procedures for Mechanical Equipment. Naval surface warfare center card rock Division, 1992.
[20] X. Shu, Y. Guo, W. Yang, K. Wei, Y. Zhu, and H. Zou, (2020) “A Detailed Reliability Study of the Motor System in Pure Electric Vans by the Approach of Fault Tree Analysis" IEEE Access 8: 5295–5307. DOI: 10.1109/ACCESS.2019.2963197.
[21] X. Wang and M. W.Z. Design and Calculation of Engineering Pressure Vessel. National Defense Industry Press, 2020.
[22] Wei Liu. “Research on the Key Technologies of Hydrothermal Fluid Pressure-retaining Sampler at Deepsea". (phdthesis). Zhejiang University, 2017.
[23] X. Shu, Y. Guo, H. Yang, H. zou, and K. Wei, (2021) “Reliability study of motor controller in electric vehicle by the approach of fault tree analysis" Engineering Failure Analysis 121: 105165. DOI: https://doi.org/10.1016/j.engfailanal.2020.105165.
We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.
