Performances of eco-fine-grained concrete containing saline sand as partial fine aggregate replacement

Nguyen Thanh Sang¹ , Thai Minh Quan¹ , May Huu Nguyen^2,3, and Lanh Si Ho This email address is being protected from spambots. You need JavaScript enabled to view it.^2,3

¹University of Transport and Communications, Hanoi, Vietnam
²University of Transport Technology, 54 Trieu Khuc, Thanh Xuan, Hanoi, 100000, Vietnam
³Civil and Environmental Engineering Program, Graduate School of Advanced Science and Engineering, 1-4-1, Kagamiyama, Higashi-Hiroshima, Hiroshima 739-527, Japan

REFERENCES

1. [1] Adam M. Neville. Properties of concrete. Pearson, 2011. ISBN 9780273786337.
2. [2] CCAA. A Guide to Concrete Practice. Cement Concrete & Aggregates Australia, page 54, 2005.
3. [3] P Monteiro. Concrete: microstructure, properties, and materials. 2006.
4. [4] PK Mehta and PJM Monteiro. Concrete: microstructure, properties, and materials. 2006.
5. [5] Hosein Naderpour and Masoomeh Mirrashid. Estimating the compressive strength of eco-friendly concrete incorporating recycled coarse aggregate using neuro-fuzzy approach. Journal of Cleaner Production, 265:121886, aug 2020. ISSN 09596526.
6. [6] D. Domínguez-Santos, V. Letelier, and P. Muñoz. Seismic capacity of 2- and 3-storey RC buildings with eco-concrete made by using residues for replacing natural aggregates. Journal of Building Engineering, 28:101086, mar 2020. ISSN 23527102.
7. [7] Umar Mohd, Gajalakshmi Pandulu, and Revathy Jayaseelan. Strength evaluation of eco-friendly concrete using taguchi method. In Materials Today: Proceedings, volume 22, pages 937–947. Elsevier Ltd, jan 2020.
8. [8] Chirag Garg and Aakash Jain. GREEN CONCRETE: EFFICIENT & ECO-FRIENDLY CONSTRUCTION MATERIALS. 2:259–264, 2014. ISSN 2347-4599.
9. [9] Y. Bai, F. Darcy, and P. A.M. Basheer. Strength and drying shrinkage properties of concrete containing furnace bottom ash as fine aggregate. Construction and Building Materials, 19(9):691–697, nov 2005. ISSN 09500618.
10. [10] Y. Bai and P. A. M. Basheer. Influence of furnace bottom ash on properties of concrete. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 156(1):85–92, feb 2003. ISSN 0965-0911.
11. [11] Zike Wang, Xiao Ling Zhao, Guijun Xian, Gang Wu, R. K. Singh Raman, Saad Al-Saadi, and Asadul Haque. Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment. Construction and Building Materials, 139:467–489, may 2017. ISSN 09500618.
12. [12] Y. L. Li, X. L. Zhao, R. K.Raman Singh, and S. Al-Saadi. Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columns. ThinWalled Structures, 106:390–406, sep 2016. ISSN 02638231.
13. [13] S. K. Kaushik and S. Islam. Suitability of sea water for mixing structural concrete exposed to a marine environment. Cement and Concrete Composites, 17(3):177–185, jan 1995. ISSN 09589465.
14. [14] Kunal Kupwade-Patil and Erez N. Allouche. Impact of Alkali Silica Reaction on Fly Ash-Based Geopolymer Concrete. Journal of Materials in Civil Engineering, 25(1): 131–139, jan 2013. ISSN 0899-1561.
15. [15] Tarek Uddin Mohammed, Hidenori Hamada, and Toru Yamaji. Performance of seawater-mixed concrete in the tidal environment. Cement and Concrete Research, 34(4): 593–601, apr 2004. ISSN 00088846.
16. [16] Hyeong Ki Kim. Utilization of sieved and ground coal bottom ash powders as a coarse binder in high-strength mortar to improve workability. Construction and Building Materials, 91:57–64, 2015. ISSN 09500618.
17. [17] Jianzhuang Xiao, Chengbing Qiang, Antonio Nanni, and Kaijian Zhang. Use of sea-sand and seawater in concrete construction: Current status and future opportunities, nov 2017. ISSN 09500618.
18. [18] Hui Zhao, Wei Sun, Xiaoming Wu, and Bo Gao. The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures. Journal of Cleaner Production, 95:66–74, 2015.
19. [19] Erdo ˘gan Özbay, Mustafa Erdemir, and Halil ˙Ibrahim Durmu¸s. Utilization and efficiency of ground granulated blast furnace slag on concrete properties–a review. Construction and Building Materials, 105:423–434, 2016.
20. [20] Aliakbar Gholampour and Togay Ozbakkaloglu. Performance of sustainable concretes containing very high volume Class-F fly ash and ground granulated blast furnace slag. Journal of Cleaner Production, 162:1407–1417, 2017. ISSN 09596526.
21. [21] M Ahmaruzzaman. A review on the utilization of fly ash. Progress in energy and combustion science, 36(3):327– 363, 2010.
22. [22] P. E. Tsakiridis, G. D. Papadimitriou, S. Tsivilis, and C. Koroneos. Utilization of steel slag for Portland cement clinker production. Journal of Hazardous Materials, 152(2): 805–811, apr 2008. ISSN 03043894.
23. [23] I. B. Topçu. Physical and mechanical properties of concretes produced with waste concrete. Cement and Concrete Research, 27(12):1817–1823, dec 1997. ISSN 00088846.
24. [24] Kim Hung Mo, Tung-Chai Ling, U Johnson Alengaram, Soon Poh Yap, and Choon Wah Yuen. Overview of supplementary cementitious materials usage in lightweight aggregate concrete. Construction and Building Materials, 139:403–418, 2017.
25. [25] Nabil Bouzoubaa, Benoit Fournier, V. Mohan Malhotra, ˇ and Dean M. Golden. Mechanical properties and durability of concrete made with high-volume fly ash blended cement produced in cement plant. ACI Materials Journal, 99(6):560–567, 2002. ISSN 0889325X.
26. [26] Jussara Tanesi. Isothermal Calorimetry as a Tool to Evaluate Early-Age Performance of Fly Ash Mixtures. Article in Transportation Research Record Journal of the Transportation Research Board, (2342):42–53, 2013.
27. [27] V Rahhal and R Talero. INFLUENCE OF TWO DIFFERENT FLY ASHES ON THE HYDRATION OF PORTLAND CEMENTS. 2004.
28. [28] B. W. Langan, K Weng, and M. A. Ward. Effect of silica fume and fly ash on heat of hydration of Portland cement. Cement and Concrete Research, 32(7):1045–1051, 2002. ISSN 00088846.
29. [29] Quoc Tri Phung, Eduardo Ferreira, Suresh Seetharam, Van Tuan Nguyen, Joan Govaerts, and Elie Valcke. Understanding hydration heat of mortars containing supplementary cementitious materials with potential to immobilize heavy metal containing waste. Cement and Concrete Composites, 115, 2021. ISSN 09589465.
30. [30] Gert Baert, Serge Hoste, Geert De Schutter, and Nele De Belie. Reactivity of fly ash in cement paste studied by means of thermogravimetry and isothermal calorimetry. Journal of Thermal Analysis and Calorimetry, 94(2):485–492, 2008.
31. [31] M. Ben Haha, K. De Weerdt, and B. Lothenbach. Quantification of the degree of reaction of fly ash. Cement and Concrete Research, 40(11):1620–1629, 2010. ISSN 00088846.
32. [32] Barbara Lothenbach, Karen Scrivener, and R. D. Hooton. Supplementary cementitious materials. Pergamon, 41(12): 1244–1256, dec 2011. ISSN 00088846.
33. [33] E. Tkaczewska and J. Małolepszy. Hydration of coalbiomass fly ash cement. Construction and Building Materials, 23(7):2694–2700, 2009. ISSN 09500618.
34. [34] Shunsuke Hanehara, Fuminori Tomosawa, Makoto Kobayakawa, and Kwang Ryul Hwang. Effects of water/powder ratio, mixing ratio of fly ash, and curing temperature on pozzolanic reaction of fly ash in cement paste. Cement and Concrete Research, 31(1):31–39, 2001. ISSN 00088846.
35. [35] Ha Won Song and Velu Saraswathy. Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag-An overview. Journal of Hazardous Materials, 138(2):226–233, 2006. ISSN 03043894.
36. [36] Cengiz Duran Ati¸s and Cahit Bilim. Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag. Building and Environment, 42(8): 3060–3065, 2007. ISSN 03601323.
37. [37] S. E. Chidiac and D. K. Panesar. Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days. Cement and Concrete Composites, 30(2):63–71, 2008. ISSN 09589465.
38. [38] Cahit Bilim, Cengiz D. Ati¸s, Harun Tanyildizi, and Okan Karahan. Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network. Advances in Engineering Software, 40(5):334– 340, may 2009. ISSN 09659978.
39. [39] J. I. Escalante, L. Y. Gómez, K. K. Johal, G. Mendoza, H. Mancha, and J. Méndez. Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions. Cement and Concrete Research, 31(10):1403– 1409, 2001. ISSN 00088846.
40. [40] Ivindra Pane and Will Hansen. Investigation of blended cement hydration by isothermal calorimetry and thermal analysis. Cement and Concrete Research, 35(6):1155–1164, 2005. ISSN 00088846.
41. [41] B Kolani, Laurie Buffo-Lacarrière, A Sellier, G Escadeillas, L Boutillon, and L Linger. Hydration of slag-blended cements. Cement and concrete composites, 34(9):1009–1018, 2012.
42. [42] Fanghui Han, Xuejiang He, Zengqi Zhang, and Juanhong Liu. Hydration heat of slag or fly ash in the composite binder at different temperatures. Thermochimica Acta, 655:202–210, 2017. ISSN 00406031.
43. [43] Qiang Wang, Mengxiao Shi, and Dengquan Wang. Contributions of fly ash and ground granulated blast-furnace slag to the early hydration heat of composite binder at different curing temperatures. Advances in Cement Research, 28(5):320–327, may 2016. ISSN 17517605.
44. [44] Hoon Moon, Sivakumar Ramanathan, Prannoy Suraneni, Chang Seon Shon, Chang Joon Lee, and Chul Woo Chung. Revisiting the effect of slag in reducing heat of hydration in concrete in comparison to other supplementary cementitious materials. Materials, 11(10), 2018. ISSN 19961944.
45. [45] Kyle A Riding, Jonathan L Poole, Kevin J Folliard, Maria C.G. Juenger, and Anton K Schindler. Modeling hydration of cementitious systems. ACI Materials Journal, 109(2):225–234, 2012. ISSN 0889325X.
46. [46] Gengying Li and Xiaohua Zhao. Properties of concrete incorporating fly ash and ground granulated blastfurnace slag. Cement and Concrete Composites, 25(3):293– 299, 2003. ISSN 09589465.
47. [47] M. L. Berndt. Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate. Construction and Building Materials, 23(7):2606–2613, 2009. ISSN 09500618.
48. [48] Architectural Institute of Japan. Japanese architectural standard specification for reinforced concrete work, jass 5. 1993.
49. [49] Mark Alexander and Sidney Mindess. Aggregates in concrete. CRC Press, 2010.
50. [50] Menghuan Guo, Biao Hu, Feng Xing, Xiaoqing Zhou, Meng Sun, Lili Sui, and Yingwu Zhou. Characterization of the mechanical properties of eco-friendly concrete made with untreated sea sand and seawater based on statistical analysis. Construction and Building Materials, 234:117339, feb 2020. ISSN 09500618.
51. [51] G Sutton and S Boyd. Effects of Extraction of Marine Sediments on the Marine Environment. In ICES Cooperative Research Report, volume 180, page pp, 2009. ISBN 978-87-7482-065-9.
52. [52] J. Limeira, L. Agullo, and M. Etxeberria. Dredged marine sand in concrete: An experimental section of a harbor pavement. Construction and Building Materials, 24(6):863– 870, jun 2010. ISSN 09500618.
53. [53] Wei Liu, Hongzhi Cui, Zhijun Dong, Feng Xing, Haochuang Zhang, and Tommy Y. Lo. Carbonation of concrete made with dredged marine sand and its effect on chloride binding. Construction and Building Materials, 120:1–9, sep 2016. ISSN 09500618.
54. [54] DE Highley, LE Hetherington, TJ Brown, DJ Harrison, and GO Jenkins. The strategic importance of the marine aggregate industry to the uk. 2007.
55. [55] Keisaburo Katano, Nobufumi Takeda, Yoshikazu Ishizeki, and Keishiro Iriya. Properties and Application of Concrete Made with Sea Water and Un-washed Sea Sand.
56. [56] Shukai Cheng, Zhonghe Shui, Tao Sun, Rui Yu, Guozhi Zhang, and Sha Ding. Effects of fly ash, blast furnace slag and metakaolin on mechanical properties and durability of coral sand concrete. Applied Clay Science, 141:111–117, jun 2017. ISSN 01691317.
57. [57] Ying Tao Li, Ling Zhou, Yu Zhang, Jing Wei Cui, and Jun Shao. Study on long-term performance of concrete based on seawater, sea sand and coral sand. In Advanced Materials Research, volume 706, pages 512–515. Trans Tech Publ, 2013.
58. [58] Pan Pan, C Yi, et al. Effects of coal bottom ash on properties of high-performance concrete. China Concrete and Cement Products, 6:19–22, 2011.
59. [59] M. D. A. Thomas, B. Q. Blackwell, and P. J. Nixon. Estimating the alkali contribution from fly ash to expansion due to alkali—aggregate reaction in concrete. Magazine of Concrete Research, 48(177):251–264, dec 1996. ISSN 0024- 9831.
60. [60] Jiong Hu, Zhi Ge, and Kejin Wang. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times. Construction and Building Materials, 50:657–663, jan 2014. ISSN 09500618.
61. [61] Xudong Chen and Shenxin Wu. Influence of waterto-cement ratio and curing period on pore structure of cement mortar. Construction and Building Materials, 38: 804–812, jan 2013. ISSN 09500618.
62. [62] American Society for Testing and Materials. ASTM C143, Standard Test Method for Slump of Hydraulic-Cement Concrete. Philadelphia: ASTM, 2001.
63. [63] ASTM. ASTM C39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens 1. ASTM International, i:1–7, 2008.
64. [64] ASTM C496. ASTM C496 / C496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2017, www.astm.org, 2017.
65. [65] American Society for Testing and Material. ASTM C293 / C293M - 16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading). 2016.
66. [66] ASTM C1202. Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration. American Society for Testing and Materials., (C):1–8, 2012.
67. [67] TCVN. Heavyweight concrete - Method for determination of water absorption. TCVN 3113:1993, pages 1–2, 1993.
68. [68] Mohd Shariq, Jagdish Prasad, and Amjad Masood. Studies in ultrasonic pulse velocity of concrete containing GGBFS. Construction and Building Materials, 40:944–950, mar 2013. ISSN 09500618.
69. [69] Rafat Siddique and Deepinder Kaur. Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures. Journal of Advanced Research, 3(1):45–51, 2012. ISSN 20901232.
70. [70] S. C. Pal, A. Mukherjee, and S. R. Pathak. Investigation of hydraulic activity of ground granulated blast furnace slag in concrete. Cement and Concrete Research, 33(9):1481– 1486, sep 2003. ISSN 00088846.
71. [71] Erhan Güneyisi and Mehmet Geso ˘glu. A study on durability properties of high-performance concretes incorporating high replacement levels of slag. Materials and Structures/Materiaux et Constructions, 41(3):479–493, 2008. ISSN 13595997.
72. [72] S. J. Barnett, M. N. Soutsos, S. G. Millard, and J. H. Bungey. Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies. Cement and Concrete Research, 36(3):434–440, 2006. ISSN 00088846.
73. [73] J. M. Khatib and J. J. Hibbert. Selected engineering properties of concrete incorporating slag and metakaolin. Construction and Building Materials, 19(6):460–472, 2005. ISSN 09500618.
74. [74] Ali Behnood, Kho Pin Verian, and Mahsa Modiri Gharehveran. Evaluation of the splitting tensile strength in plain and steel fiber-reinforced concrete based on the compressive strength. Construction and Building Materials, 98: 519–529, 2015. ISSN 09500618.
75. [75] Frederic Legeron and Patrick Paultre. Prediction of modulus of rupture of concrete. Materials Journal, 97(2):193– 200, 2000.
76. [76] Chamroeun Chhorn, Seong Jae Hong, and Seung Woo Lee. Relationship between compressive and tensile strengths of roller-compacted concrete. Journal of Traffic and Transportation Engineering (English Edition), 5(3): 215–223, jun 2018. ISSN 20957564.
77. [77] Mehmet Gesoglu, Erhan Güneyisi, and Erdo ˇ gan Özbay. ˇ Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume. Construction and Building Materials, 23(5):1847–1854, 2009. ISSN 09500618.
78. [78] Erhan Güneyisi, Turan Özturan, and Mehmet Gesoglu. ˇ Effect of initial curing on chloride ingress and corrosion resistance characteristics of concretes made with plain and blended cements. Building and Environment, 42(7): 2676–2685, 2007. ISSN 03601323.