Modelling of Air Pumping Noise and Study of Tread Pattern Pitch

Ting-Wei Guo; Jung-Ho Cheng

doi:10.6180/jase.202104_24(2).0004

Modelling of Air Pumping Noise and Study of Tread Pattern Pitch

Ting-Wei Guo This email address is being protected from spambots. You need JavaScript enabled to view it.¹ and Jung-Ho Cheng¹

¹Department of Mechanical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei City 10617, Taiwan R.O.C.

Received: August 16, 2020
Accepted: October 5, 2020
Publication Date: April 1, 2021

Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.

Download Citation: ||https://doi.org/10.6180/jase.202104_24(2).0004

ABSTRACT

The sources of noise from a pneumatic tire are complex. They include the vibrations of the tread block and carcass, tread block slip friction, carcass inner standing wave patterns and air pumping of the tread pattern. The frequency of the air pumping of the tread pattern ranges from 800 to 1200 Hz, which is the typical frequency range to which human ears are sensitive. Therefore, air pumping has a direct influence on noise. This study uses the finite element software, Abaqus, and the fluid mechanics software, FlowVision, to establish an air pumping noise model for tires. The model simulates the air pumping effects of the tire tread. The change in sound pressure is converted from the time domain to the frequency domain by fast Fourier transforms, and A-weighting modified sound pressure levels are added to calculate the spectrum and the total sound pressure level. The air pumping noise model for tires was verified experimentally and utilized to study the influence of tread pattern pitch on the air pumping noise.

Keywords: radial tire, air pumping, tread pattern noise, fluid structure coupling

REFERENCES

[1] UNECE. UNECE Regulation No. 117 - Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance.
[2] M.-X. Huang and R.-J. Shyu. Study of Tire Noise Generation Mechanism,. The 36th National Conference on Theoretical and Applied Mechanics, Taoyuan, R.O.C, 2012.
[3] Y.-H. Huang. Studies of Noise Reduction with Designs of Tire Tread Patterns. Master’s thesis, National Taiwan University, R.O.C., 2016.
[4] T. Sakata, H. Morimura, and H. Ide. Effects of tire cavity resonance on vehicle road noise. Tire Science and Technology, 18(2):68–79, 1990.
[5] H. M. R. Aboutorabi and L. Kung. Application of coupled structural acoustic analysis and sensitivity calculations to a tire noise problem. Tire Science and Technology, 40(1):25–41, 2012.
[6] S. Fujiwara, K. Yumii, T. Saguchi, and K. Kato. Reduction of tire groove noise using slot resonators. Tire Science and Technology, 37(3):207–223, 2009.
[7] Y. Wei, X. Feng, Z. Fuqiang, and D. Xiang. Simulation of Rolling Noise Based on the Mixed Lagrangian–Eulerian Method. Tire Science and Technology, 44(1):36–50, 2016.
[8] M.-X. Huang and J.-Z. Tu. Study of Tread Pattern Noise, 2009.
[9] FlowVision Users guide Verson 3.09.05. .
[10] R. S. Marlow. A general first-invariant hyperelastic constitutive model. Constitutive Models for Rubber, pages 157–160, 2003.
[11] ABAQUS Analysis User’s Manual.

ABSTRACT

REFERENCES

Latest Articles