Zhi-Yong He1,2, Yun-Qiang Wu This email address is being protected from spambots. You need JavaScript enabled to view it.1 and Xiao-Ping You1

1College of Automotive and Mechanical Engineering, Changsha University of Science & Technology, Changsha 410076, P.R. China
2Key Laboratory of Hunan Province for Safety Design and Reliability Technology of Engineering Vehicles of Changsha University of Science & Technology, Changsha 410076, P.R. China


 

Received: November 2, 2018
Accepted: April 14, 2019
Publication Date: September 1, 2019

Download Citation: ||https://doi.org/10.6180/jase.201909_22(3).0009  

ABSTRACT


The research presents a current-carrying plate coupled vibration of fluid fluctuation suppression principle, develops a kind of structural vibration fluid filter, uses the damped balance hole, static pressure balanced cavity and fluid pulsating energy of plate vibration attenuation, which achieves the common filtering of fluid resonance and structure resonance. By small disturbance theory, it conducts a dynamic analysis of the current-carrying plate under fluid coupling, discusses the dynamic characteristics of the attenuator with lumped parameter method, and sets up the transfer matrix mode, obtaining the first three resonance frequencies through simulation analysis that is consistent with the theoretical calculation. At last, it tests the performance of the experimental prototype, and proves that the attenuator has good fluid fluctuation attenuation effect at the coupling resonant frequency through analyzing the time domain of fluid pressure and the frequency domain signal, which also has certain inhibitor effectiveness for fluid system’s pressure fluctuation within its filtering bandwidth, verifying the correctness of the theoretical analysis and providing the new method to restrain the fluid system’s pressure fluctuation.


Keywords: Hydraulic System, Pressure Fluctuation, Filter, Fluid-structure Interaction, Performance Research


REFERENCES


  1. [1] Schonfeld, J. C. (1951) Analogy of hydraulic, mechanical, acoustic and electric systems, Applied Scientific Research 3(1), 417450.
  2. [2] He, X. Y., and Q. H. He (2010) Fault diagnosis of construction machinery hydraulic system based on multinetwork model, Journal of Central South University (Science and Technology) 41(4), 13851390. (in Chinese)
  3. [3] He, Z. Y., Q. H. He, and Z. G. Li (2011) Filtering mechanism of structural vibration type fluid pulsation attenuator and its test veriication, Construction Machinery and Equipment 42(11), 1620. (in Chinese)
  4. [4] Yang, X. S., Y. L. Shen, and J. Cai (2006) Impedance adjustment method for reducing pressure pulsation in aircraft pump source circuit, Journal of Air Force Engineering University (Natural Science Edition) 7(3), 1315. (in Chinese)
  5. [5] Li, S. L., and Z. X. Jiao (2006) Research status and prospect of hydraulic fluid pulsation active control, Machine Tool & Hydraulics | Mach Tool Hydrau 9, 243246. (in Chinese)
  6. [6] Wu, W. F. (2005) Hydraulic system hydraulic pulsation research, Journal of Zhejiang University of Technology 33(6), 696701. (in Chinese)
  7. [7] Xie, B. A., and Q. Wang (2000) Study on the effect of accumulator on the pulsation reduction of pipeline fluid,Noiseand VibrationControl 8,25.(inChinese)
  8. [8] Song, L. N., Y. L. Zhuang, and D. Y. Shu (2002) Investigation of valve plate in water hydraulic axial piston motor, Journal of Shanghai University (English Edition) 6(1), 7378. (in Chinese) doi: 10.1007/s11741002-0011-6
  9. [9] Kim,S. Y., Y. J. Nam,and M.K. Park (2006) Design of port plate in gerotor pump for reduction of pressure pulsation, Journal of Mechanical Science and Technology 20(10), 16261637.
  10. [10] Bao, H. G., G. L. Chen, and Y. C. Liu (2003) Experimental study on wave absorber of hydraulic system, Ship Science and Technology 25(5), 8182. (in Chinese)
  11. [11] Tong, X. P., and K. Liu (2005) Study on sound absorbing property of elasticplatein fluid, Proceedings of the 10th Symposium on Ship Underwater Noise, 181182. (in Chinese)
  12. [12] Wang, X. Z. (2009) Analysis of Filtering Properties of ThinPlateHydraulicMufflerHuang,Changsha:Changsha University of Science & Technology, 78. (in Chinese)
  13. [13] Huang, L. (2001) A theoretical study of passive control of duct noise using panels of varying compliance, J. Acoust. Soc. Am. 109(6), 2805–2814. doi: 10.1121/ 1.1369108
  14. [14] Huang, L. (2001) A theoretical study of passive control of duct noise using panels of varying compliance, J. Acoust. Soc. Am. 109(6), 2805–2814. doi: 10.1121/ 1.1369108
  15. [15] Jiang, Y. L., D. Q. Yang, X. Z. Lin, et al. (2012) Asimplified method of vibroacoustics analysis for liquidfilled pipeline in ship shipbuilding of china, 53(4), 4658.
  16. [16] Pang, J. W. (2001) A new analytical model for fluid transmissionlines, Mechanical &ElectricalEngineering Technology 30(5), 4045.
  17. [17] Liu, J. (2002) Fluid Network Theory, Beijing: China Coal Industry Publishing House, 1430.
  18. [18] He, S. H., X. Z. Wang, Z. Y. He, et.al. (2013) Filtering properties of thin plate hydraulic pulsation attenuator, Journal of Mechanical Engineering 49(4), 148153. doi: 10.3901/JME.2013.04.148 (in Chinese)
  19. [19] Du, R. (2010) The Characteristic Analysis of Pulsation Dampers in Hydraylic Systems, Chengdu: Southwest Jiao tong University, 6, 3738.
  20. [20] He, Z. Y., Q. H. He, S. H. He, et al. (2012) Experimental research on fluid pulsation attenuator filtering based on fluid-structure coupling vibration mechanism, Shipbuilding of China 53(1), 137144.