Role of Thermal Spray Coatings on Wear, Erosion and Corrosion Behavior: A Review

Jimmy Mehta¹, Varinder Kumar Mittal¹ and Pallav Gupta This email address is being protected from spambots. You need JavaScript enabled to view it.¹

¹Department of Mechanical Engineering, A.S.E.T., Amity University, Uttar Pradesh, Noida-201313, India

REFERENCES

1. [1] Singh, L., Chawla, V. and Grewal, J. S., “AReview on Detonation Gun Sprayed Coatings,” Journal of Minerals & Materials Characterization & Engineering, Vol. 11, No. 3, pp. 243265 (2012). doi: 10.4236/jmmce. 2012.113019
2. [2] Sidhu, B.S.,Puri,D.andPrakash, S.,“Mechanical and Metallurgical Properties of Plasma Sprayed and Laser Remelted Ni–20Cr and Stellite-6 Coatings,” Journal of Materials Processing Technology, Vol. 159, pp. 347355 (2005). doi: 10.1016/j.jmatprotec.2004.05.023
3. [3] Chawla, V., Sidhu, B. S., Puri, D. and Prakash, S., “Performance of Plasma Sprayed Nano-structured and Conventional Coatings,” Journal of the Australian Ce
   ramic Society, Vol. 44, No. 2, pp. 5662 (2008).
4. [4] Balan, K. N., Bapu, B. R. R., Rajan, A. J. and Manimaran, “Enhancement of Surface Property by Thermal Spray Coating Technique – A Review,” Proceedings of 10th IRAJ International Conference, pp. 2931 (2013).
5. [5] Chatha, S. S., Sidhu, H. S. and Sidhu, B. S., “Characterization and Corrosion-erosion Behavior of Carbide Based Thermal Spray Coatings,” Journal of Minerals Materials Characterization & Engineering, Vol. 11, No. 6, pp. 569586 (2012). doi: 10.4236/jmmce.2012. 116041
6. [6] Bhatia, R., Sidhu, H. S. and Sidhu, B. S., “High Temperature Behavior of Cr3C2-NiCr Coatings in the Actual Coal-fired Boiler Environment,” ASM International (ASM) and The Minerals, Metals & Materials Society (TMS), Vol. 2E, pp. 7086 (2015). doi: 10. 1007/s40553-015-0045-x
7. [7] Mishra, N. K., Kumar, N. and Mishra, B. S., “Hot Corrosion Behavior of Detonation Gun Sprayed Al2O340TiO2 Coating on Nickel Based Superalloys at 900 C,” Hindawi Publishing Corporation Indian Journal of Materials Science, Article ID 453607 (2014). doi: 10.1155/2014/453607
8. [8] Bhatia, R., Singh, H. and Sidhu, B. S., “Hot Corrosion Studies of HVOF-sprayed Coating on T-91 Boiler Tube Steel at Different Operating Temperatures,” Journal of Materials Engineering and Performance, Vol. 23, pp. 493505 (2013). doi: 10.1007/s11665-013-0771-0
9. [9] Chatha, S. S., Sidhu, H. S. and Sidhu, B. S., “Characterization and Corrosion-erosion Behavior of Carbide Based Thermal Spray Coatings,” Journal of Minerals Materials Characterization & Engineering, Vol. 11, No. 6, pp. 569586 (2011). doi: 10.4236/jmmce.2012. 116041
10. [10] Zorawski, W. and Bokuvka, O., “Properties of Plasma and HVOF Sprayed Coatings,” Materials Engineering Materiálovéininierst, Vol. 20, pp. 211 (2012).
11. [11] Yeh, C. H., Yang, C. H., Yuh Su, C. and Hsiao, “Material Characterization of Thermal Sprayed Nickel AluminumCoatings Using a Laser Ultrasound Technique,” IEEE International Ultra sonics Symposium Proceedings (2011). doi: 10.1109/ULTSYM.2011.0449
12. [12] Sudhakara, D., Jeyasimman, D. and Duraiselvam, M., “Dry Sliding Wear Behavior of Cr3C2-NiCr Coating on Austenitic Stainless Steel,” International Journal of Core Engineering & Management (IJCEM), Vol. 1, No. 12 (2015).
13. [13] Badoni, P. and Joshi, A., “Application of Taguchi Method for Optimization of Abrasive Wear Characteristics of Tungsten Carbide-cobalt and Nickel-chromium Based Coating on High Speed Steel Deposited by Detonation Gun Process,” International Journal of Advances in Engineering & Technology, Vol. 8, No. 6, pp. 976983 (2015). doi: 10.11127/ijammc.2013.02.042
14. [14] Yao, J., Yang, L., Li,B.and Li,Z., “Characteristicsand Performance of Hard Ni60 Alloy Coating Produced with Supersonic Laser Deposition Technique,” Materials & Design, Vol. 183, pp. 26–35 (2015). doi: 10. 1016/j.matdes.2015.05.087
15. [15] Yadav, A. S. and Mishra, S. B., “Slurry Erosive Wear Study of D-gun Sprayed Coatings on SAE,” International Conference on Control, Computing, Communication and Materials (ICCCCM), Vol. 43, ISBN 9781-4799-1375-6 (2013). doi: 10.1109/ICCCCM.2013. 6648923
16. [16] Richert, M. W., Mikuowski, B., Paka, P., Hotlo, A. and Perek-Nowak, M., “The Effect of Chemical Composition and Thermal Sprayed Method on the Chromium and Tungsten Carbides Coatings Microstructure,” Journal of Surface Engineered Materials and Advanced Technology, Vol. 3, pp. 15 (2013). doi: 10.4236/jsemat.2013.31001
17. [17] Murthy, J. K. N., Rao, D. S. and Venkataraman, B., “Effect of Grinding on the Erosion Behavior of a WC– Co–Cr Coating Deposited by HVOF and Detonation Gun Spray Processes,” Wear, Vol. 249, pp. 592–600 (2001). doi: 10.1016/S0043-1648(01)00682-2
18. [18] Singh, G. and Bhandari, S., “Slurry Erosion PerformanceofDetonationGunSprayedStellite-6on13Cr4Ni Hydro Turbine Steel at Two Different Angles under Hydro-accelerated Conditions,” Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms (INaCoMM2013) (2013).
19. [19] Thakur, L. and Arora, N., “A Comparative Study on Slurry and Dry Erosion Behaviour of HVOF Sprayed WC–CoCr Coating,” Wear, Vol. 303, pp. 405–411 (2013). doi: 10.1016/j.wear.2013.03.028
20. [20] Dhawan, S., Singh, H. and Singh, R., “Erosion BehaviorofStainlessSteelGrade-316,” IOSR Journal ofMechanical and Civil Engineering, pp. 5863 (2015).
21. [21] Mishra, N. K., Rai,A. K., Mishra, S. B.and Kumar, R., “Hot Corrosion Behavior of Detonation Gun Sprayed Stellite-6 and Stellite-21 Coating on Boiler Steel SAE 431 at 900 C,” International Journal of Corrosion, Article ID 146391 (2014). doi: 10.1155/2014/146391
22. [22] Singh, H., Goyal,K. and Goyal,D. K., “Slurry Erosion Behavior of Plasma Thermal Sprayed (50%) WC-CoCr and Ni-Cr-B-Si Coatings of Different Thickness on CA6NM Turbine Steel Material,” Manufacturing Science and Technology, Vol. 2, No. 4, pp. 8192 (2014).
23. [23] Bhatia, R., Sidhu, H. S. and Sidhu, B. S., “High Temperature Behavior of Cr3C2-NiCr Coatings in the Actual Coal-fired Boiler Environment,” Metallurgical and Materials Transaction E, Vol. 2E (2015). doi: 10.1007/s40553-015-0045-x
24. [24] Rendon-Belmonte, M., Perez-Quiroz, J. T., TeranGuillen, J., Porcayo-Calderon, J., Torres-Acosta, A. and Orozco-Gamboa, G., “Evaluation of a Cr3C2(NiCr) Coating Deposited on S4400 by Means of an HVOF Process and Used for Flow Plates of PEM Fuel,” International Journal Electrochemical Science, Vol. 7, pp. 1079–1092 (2012).
25. [25] Richert, M. W., “The Wear Resistance of Thermal Spray the Tungsten and Chromium Carbides Coatings,” Journal of Achievements in Material and Manufacturing Engineering, Vol. 47, pp. 177184 (2011).
26. [26] Chawla, V., Chawla, A., Puri, D., Prakash, S., Gurbuxani, P. G. and Sidhu, B. S., “Hot Corrosion & Erosion Problems in Coal Based Power Plants in India and Possible Solutions – AReview,” Journal of Minerals &Materials Characterization & Engineering, Vol. 10, No. 4, pp. 367385 (2011). doi: 10.4236/jmmce.2011.104027
27. [27] Gaona, M., Lima, R. S. and Marple, B. R., “Influence of Particle Temperature and Velocity on the Microstructure and Mechanical Behavior of High Velocity Oxy-fuel (HVOF)-Sprayed Nano Structured Titania Coatings,” Journal of Materials Processing Technology, Vol. 198, pp. 426–435 (2008). doi: 10.1016/j. jmatprotec.2007.07.024
28. [28] Kamal, S., Sharma, K. V. and Qistina Nafisah Iman Kamarulzaman, “Mechanical and Micro-structural Characterization of Thermal Spray Coating,” Open Journal of Advanced Materials Research, Vol. 2, No. 1, pp. 812 (2015).
29. [29] Singh, H., Chatha,S.S.and Sidhu, B.S.,“Roleof Rare Earth Elements in Thermal Spray Coating,” National Conference on Latest Developments in Materials, Manufacturing and Quality Control, ISBN 978-93-5196055-3 (2015).
30. [30] Chatha, S. S., Sidhu, H. S. and Sidhu, B. S., “Characterization and Corrosion-erosion Behavior of Carbide Based Thermal Spray Coatings,” Journal of Minerals & Materials Characterization & Engineering, Vol. 11, No. 6, pp. 569586 (2011). doi: 10.4236/jmmce.2012. 116041
31. [31] Grewal, J. S., Singla, J. P. and Chawla, V., “A Survey of the Detonation Gun Sprayed Wear Resistant Coatings,” National Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (2010).
32. [32] Kamal,S., Jayaganthan, R.and Prakash, S., “Mechanical and Micro-structural Characteristics of Detonation Gun Sprayed NiCrAlY+0.4 wt% CeO2 Coatings on Super-alloys,” Materials Chemistry and Physics, Vol. 122, No. 1, pp. 262268 (2010). doi: 10.1016/j. matchemphys.2010.02.046
33. [33] Chawla, V., Chawla, A., Sidhu, B. S., Prakash, S. and Puri, D., “Oxidation Behavior of Nano-structured TiAlN and AlCrN Thin Coatings on ASTM-SA213T-22 Boiler Steel,” Journal of Minerals, Materials Characterization Engineering, Vol. 9, No. 11, pp. 10371057 (2010). doi: 10.4236/jmmce.2010.911075
34. [34] Shukla, V. N., Tewari, V. K. and Jayaganthan, R., “Comparison of Tribological Behavior of Cr3C2/NiCr Coatings Deposited by Different Thermal Spray Techniques: a Review,” National Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, Jalandhar (2011).
35. [35] Singh, H., Grewal, M. S., Shekhon, H. S. and Rao, R. G.,“Sliding Wear Performance of High-velocity Oxyfuel Spray Al2O3/TiO2 and Cr2O3 Coatings,” Proc. IMechE Part J: J. Engineering Tribology, Vol. 222 (2007).
36. [36] Oksa, M., Turunen, E., Suhonen, T., Varis, T. and Hannula, S. P., “Optimization and Characterization of High Velocity Oxy-fuel Sprayed Coatings: Techniques, Materials, and Applications,” Coatings, Vol. 1, pp. 1752 (2011). doi: 10.3390/coatings1010017
37. [37] Mahesh, R. A., Jayaganthan, R. and Prakash, S., “Microstructural Characterization and Hardness Evaluation of HVOF Sprayed Ni–5Al Coatings on Ni- and Fe-based Superalloys,” Journal of Materials Processing Technology, Vol. 209, pp. 3501–3510 (2009). doi: 10.1016/j.jmatprotec.2008.08.009
38. [38] Sova, Pervushin, D. and Smurov, I., “Development of Multimaterial Coatings by Cold Spray and Gas Detonation Spraying,” Surface and Coatings Technology, Vol. 205, No. 4, pp. 11081114 (2010). doi: 10.1016/ j.surfcoat.2010.07.092
39. [39] Kaushal, S., Singh, S. and Kaushal, G., “Performance of D-gun Sprayed Cr3C2+25NiCr Coating on ASTMA 743 CA6NM Turbine Steel in a Simulated Erosive Environment,” International Journal of Surface Engineering & Materials Technology, Vol. 3, No. 1, pp. 3945 (2013).
40. [40] Bhatia, R., Singh, H. and Sidhu, B. S., “Hot Corrosion Studies of HVOF-Sprayed Coating on T-91 Boiler Tube Steel at Different Operating Temperatures,” Journal of Materials Engineering and Performance, Vol. 23, pp. 493–505 (2014). doi: 10.1007/s11665013-0771-0
41. [41] Singh, G., Singh, H. and Sidhu, B. S., “Corrosion Behavior of Plasma Sprayed Hydroxyapatite and Hydroxyapatite - Silicon Oxide Coatings on AISI 304 for Biomedical Application,” Applied Surface Science, Vol. 284, pp. 811–818 (2013). doi: 10.1016/j.triboint. 2011.01.002
42. [42] Kumar, S., Mudgal, D., Singh, S. and Prakash, S., “Cyclic Oxidation Behavior of Bare and Cr3C2-25 (NiCr) Coated Super Alloy at Elevated Temperature,” Advanced Materials Letters, Vol. 4, No. 10, pp. 754761 (2013). doi: 10.5185/amlett.2013.2428
43. [43] Shukla, V.N., Jayaganthan, R.and Tewari,V.K., “Surface Engineering Analysis of HVOF Sprayed Cr3C2NiCr Coating under High-temperature Oxidation,” International Journal of Surface Engineering &Materials Technology, Vol. 4, No. 1 (2014).
44. [44] Shukla, V. N., Rana, N., Jayaganthan, R. and Tewari, K., “Degradation Studies of Wire Arc Sprayed FeCrBSiMn Alloy Coating in Molten Salt Environment,” Procedia Engineering, Vol. 75, pp. 113–117 (2014). doi: 10.1016/j.proeng.2013.11.025
45. [45] Shakoor, R. A., Kahraman, R., Waware, U. S., Wang, X. and Gao, W., “Properties of Electrodeposited NiB-ZrO2 Composite Coatings,” Int. J. Electrochem. Sci., Vol. 10, pp. 2110–2119.