Electrical Engineering

Ming-Hung Hsu This email address is being protected from spambots. You need JavaScript enabled to view it.1

1Department of Electrical Engineering, National Penghu University, Penghu, Taiwan 880, R.O.C.

 

Received: January 27, 2008
Accepted: August 12, 2008
Publication Date: September 1, 2009

Download Citation: ||https://doi.org/10.6180/jase.2009.12.3.12  


ABSTRACT

This work analyzes hyperbolic heat conduction problems using the differential quadrature method. Numerical results are compared with published results to assess the efficiency and systematic procedure of this novel approach to solving hyperbolic heat conduction problems. The computed solutions to the hyperbolic heat conduction problems correlate well with published data. Two examples are analyzed using the proposed method. The effects of the relaxation time  on the temperature distribution are investigated. Hyperbolic heat conduction problems are solved efficiently using the differential quadrature method.


Keywords: Hyperbolic Heat Conduction, Differential Quadrature Method, Numerical Analysis


REFERENCES

  1. [1] Yang, C. Y., “Direct and Inverse Solutions of Hyperbolic Heat Conduction Problems,” Journal of Thermophysics and Heat Transfer, Vol. 19, pp. 217225 (2005).
  2. [2] Lor, W. B. and Chu, H. S., “Effect of Interface Thermal Resistance on Heat Transfer in a Composite Medium Using the Thermal Wave Model,” Internal Journal of Heat and Mass Transfer, Vol. 43, pp. 653663 (2000)
  3. [3] Antaki, P. J., “Importance of Non-Fourier Heat Conduction in Solid-Phase Reactions,” Combustion and Flame, Vol. 112, pp. 329341 (1998).
  4. [4] Chen, T. M., “Numerical Solution of Hyperbolic Heat Conduction in Thin Surface Layers,” International Journal of Heat and Mass Transfer, Vol. 50, pp. 44244429 (2007).
  5. [5] Sanderson, T., Ume, C. and Jarzynski, J., “Hyperbolic Heat Equations in Laser Generated Ultrasound Models,” Ultrasonics, Vol. 33, pp. 415421 (1995).
  6. [6] Liu, L. H., Tan, H. P. and Tong, T. W., “Non-Fourier Effects on Transient Temperature Response in Semitransparent Medium Caused by Laser Pulse,” International Journal of Heat and Mass Transfer, Vol. 44, pp. 33353344 (2001).
  7. [7] Mullis, A. M., “Rapid Solidification and a Finite Velocity for the Propagation of Heat,” Material Science and Engineering, Vol. 22628, pp. 2832 (1997).
  8. [8] Mullis, A. M., “Rapid Solidification within the Framework of a Hyperbolic Conduction Model,” International Journal of Heat and Mass Transfer, Vol. 40, pp. 40854094 (1997).
  9. [9] Sahoo, R. K. and Roetzel, W., “Hyperbolic Axial Dispersion Model for Heat Exchangers,” International Journal of Heat and Mass Transfer, Vol. 45, pp. 1261 1270 (2002).
  10. [10] Roetzel, W. and Das, S. K., “Hyperbolic Axial Dispersion Model: Concept and Its Application to a Plate Heat Exchanger,” International Journal of Heat and Mass Transfer, Vol. 38, pp. 30653076 (1995).
  11. [11] Roetzel, W. and Na Ranong, C., “Consideration of Maldistributation in Heat Exchangers Using the Hyperbolic Dispersion Model,” Chemical Engineering and Processing, Vol. 38, pp. 675681 (1999).
  12. [12] Lin, J. Y., “The Non-Fourier Effect on the Fin Performance under Periodic Thermal Conditions,” Applied Mathematical Modelling, Vol. 22, pp. 629640 (1998).
  13. [13] Abdel-Hamid, B., “Modelling Non-Fourier Heat Conduction with Periodic Thermal Oscillation Using the Finite Integral Transform,” Applied Mathematical Modelling, Vol. 23, pp. 899914 (1999).
  14. [14] Tang, D. W. and Araki, N., “Non-Fourier Heat Conduction in a Finite Medium under Periodic Surface Thermal Disturbance,” International Journal of Heat and Mass Transfer, Vol. 39, pp. 15851590 (1996).
  15. [15] Tan, Z. M. and Yang, W. J., “Propagation of Thermal Waves in Transient Heat Conduction in a Thin Film,” Journal of the Franklin Institute, Vol. 336, pp. 185 197 (1999).
  16. [16] Tan, Z. M. and Yang, W. J., “Heat Transfer during Asymmetrical Collision of Thermal Waves in a Thin Film,” International Journal of Heat and Mass Transfer, Vol. 40, pp. 39994006 (1997).
  17. [17] Weber, C., “Analysis and Solution of the Ill-Posed Inverse Heat Conduction Problem,” International Journal of Heat and Mass Transfer, Vol. 24, pp. 17831791 (1981).
  18. [18] Al-Khalidy, N., “On the Solution of Parabolic and Hyperbolic Inverse Heat Conduction Problems,” International Journal of Heat and Mass Transfer, Vol. 41, pp. 37313740 (1998).
  19. [19] Al-Khalidy, N., “Analysis of Boundary Inverse Heat Conduction Problems Using Space Marching with Savitzky-Gollay Digital Filter,” International Communication of Heat and Mass Transfer, Vol. 26, pp. 199208 (1999).
  20. [20] Chen, H. T., Peng, S. Y. and Fang, L. C., “Numerical Method for Hyperbolic Inverse Heat Conduction Problems,” International Communication of Heat and Mass Transfer, Vol. 28, pp. 847856 (2001).
  21. [21] Beck, J. V., Blackwell, B. and Clair, C. R. S., Inverse Heat Conduction-Ill Posed Problem, First ed., Wiley, New York (1985).
  22. [22] Yang, C. Y., “Determination of Temperature-Dependent Thermophysical Properties from Temperature Responses Measured and Medium’s Boundaries,” International Journal of Heat and Mass Transfer, Vol. 43, pp. 12611270 (2000).
  23. [23] Yang, C. Y., “Estimation of Boundary Conditions in Nonlinear Inverse Heat Conduction Problems,” Journal of Thermophysics and Heat Transfer, Vol. 17, pp. 389395 (2003).
  24. [24] Carey, G. F. and Tsai, M., “Hyperbolic Heat Transfer with Reflection” Numerical Heat Transfer, Vol. 5, pp. 309327 (1982).
  25. [25] Glass, D. E., Ozisik, M., McRae, D. S. and Vick, B., “On the Numerical Solution of Hyperbolic Heat Conduction,” Numerical Heat Transfer, Vol. 8, pp. 497 504 (1985).
  26. [26] Yeung, W. K. and Tung, T. L., “A Numerical Scheme for Non-Fourier Heat Condition, Part I: One-Dimensional Problem Formulation and Applications,” Numerical Heat Transfer, Vol. 33, pp. 215233 (1998).
  27. [27] Anderson, D. A., Tannehill, J. C. and Pletcher, R. H., Computational Fluid Mechanics and Heat Transfer, Hemisphere, Washington, DC (1984).
  28. [28] Tamma, K. K. and Raildar, S. B., “Specially Tailored Trans-Finite-Element Formulations for Hyperbolic Heat Conduction Involving Non-Fourier Effects,” Numerical Heat Transfer, Part B, Vol. 15, pp. 211226 (1989).
  29. [29] Yang, H. Q., “Solution of Two-Dimensional Hyperbolic Heat Conduction by High-Resolution Numerical Method,” Numerical Heat Transfer, Vol. A21, pp. 333349 (1992).
  30. [30] Chen, H. T. and Lin, J. Y., “Numerical Analysis for Hyperbolic Heat Conduction,” International Journal of Heat and Mass Transfer, Vol. 36, pp. 28912898 (1993).
  31. [31] Chen, H. T. and Lin, J. Y., “Analysis of Two-Dimensional Hyperbolic Heat Conduction Problems,” International Journal of Heat and Mass Transfer, Vol. 37, pp. 153164 (1994).
  32. [32] Bellman, R. and Casti, J., “Differential Quadrature and Long-Term Integration,” Journal of Mathematical Analysis and Application, Vol. 34, pp. 235238 (1971).
  33. [33] Bellman, R. E., Kashef, B. G. and Casti, J., “Differential Quadrature: A Technique for Rapid Solution of Nonlinear Partial Differential Equations,” Journal Computational Physics, Vol. 10, pp. 4052 (1972).
  34. [34] Bert, C. W. and Mailk, M., “Differential Quadrature Method in Computational Mechanics: A Review,” Applied Mechanics Review, Vol. 49, pp. 128 (1996).
  35. [35] Bert, C. W., Jang, S. K. and Striz, A. G., “Two New Approximate Methods for Analyzing Free Vibration of Structural Components,” AIAA Journal, Vol. 26, pp. 612618 (1988).
  36. [36] Bert, C. W. and Malik, M., “Free Vibration Analysis of Tapered Rectangular Plates by Differential Quadrature Method: A Semi-Analytical Approach,” Journal of Sound and Vibration, Vol. 190, pp. 4163 (1996).
  37. [37] Bert, C. W. and Malik, M., “On the Relative Effects of Transverse Shear Deformation and Rotary Inertia on the Free Vibration of Symmetric Cross-Ply Laminated Plates,” Journal of Sound and Vibration, Vol. 193, pp. 927933 (1996).
  38. [38] Bert, C. W., Wang, X. and Striz, A. G., “Differential Quadrature for Static and Free Vibration Analysis of Anisotropic Plates,” International Journal of Solids and Structures, Vol. 30, pp. 17371744 (1993).
  39. [39] Bert, C. W., Wang, X. and Striz, A. G., “Convergence of the DQ Method in the Analysis of Anisotropic Plates,” Journal of Sound and Vibration, Vol. 170, pp. 140144 (1994).
  40. [40] Striz, A. G., Chen, W. and Bert, C. W., “Static Analysis of Structures by the Quadrature Element Method (QEM),” International Journal of Solids and Structures, Vol. 31, pp. 28072818 (1994).
  41. [41] Jang, S. K., Bert, C. W. and Striz, A. G., “Application of Differential Quadrature to Static Analysis of Structural Components,” International Journal for Numerical Methods in Engineering, Vol. 28, pp. 561 577 (1989).
  42. [42] Kang, K., Bert, C. W. and Striz, A. G., “Static Analysis of a Curved Shaft Subjected to End Torques,” International Journal of Solids and Structures, Vol. 33, pp. 15871596 (1996).
  43. [43] Wang, X. and Bert, C. W., “A New Approach in Applying Differential Quadrature to Static and Free Vibrational Analyses of Beams and Plates,” Journal of Sound and Vibration, Vol. 162, pp. 566572 (1993).
  44. [44] Malik, M. and Bert, C. W., “Implementing Multiple Boundary Conditions in the DQ Solution of HigherOrder PDE’s Application to Free Vibration of Plates,” International Journal for Numerical Methods in Engineering, Vol. 39, pp. 12371258 (1996).
  45. [45] Feng, Y. and Bert, C. W., “Application of the Quadrature Method to Flexural Vibration Analysis of a Geometrically Nonlinear Beam,” Nonlinear Dynamics, Vol. 3, pp. 1318 (1992).
  46. [46] Chen, W. L., Striz, A. G. and Bert, C. W., “High-Accuracy Plane Stress and Plate Elements in the Quadrature Element Method,” International Journal of Solid and Structures, Vol. 37, pp. 627647 (2000).
  47. [47] Liew, K. M., Han, J. B., Xiao, Z. M. and Du, H., “Differential Quadrature Method for Mindlin Plates on Winkler Foundations,” International Journal of Mechanical Sciences, Vol. 38, pp. 405421 (1996).
  48. [48] Han, J. B. and Liew, K. M., “Axisymmetric Free Vibration of Thick Annular Plates,” International Journal of Mechanical Science, Vol. 41, pp. 10891109 (1999).
  49. [49] Liew, K. M., Han, J. B. and Xiao, Z. M., “Differential Quadrature Method for Thick Symmetric Cross-Ply Laminates with First-Order Shear Flexibility,” International Journal of Solids and Structures, Vol. 33, pp. 26472658 (1996).
  50. [50] Du, H., Liew, K. M. and Lim, M. K., “Generalized Differential Quadrature Method for Buckling Analysis,” Journal of Engineering Mechanics, Vol. 122, pp. 95 100 (1996).

Latest Articles

Multi-level Semantic Fusion Network for Few-shot Multimedia Image Recognition in Education Management
Multi-level Semantic Fusion Network for Few-shot Multimedia Image Recognition in Education ManagementVolume 28, Issue 2 (In Press)

Read more: ...

River bank erosion prediction using multivariable linear regression
River bank erosion prediction using multivariable linear regressionVolume 27, Issue 12 (In Press)

Read more: ...

Optimization of Ultrasound-Assisted Pectin Extraction from Durian Rind
Optimization of Ultrasound-Assisted Pectin Extraction from Durian RindVolume 28, Issue 2 (In Press)

Read more: ...

Short-time prediction model for cross-section passenger flow in urban transit trains using GCN-AM-BiLSTM
Short-time prediction model for cross-section passenger flow in urban transit trains using GCN-AM-BiLSTMVolume 28, Issue 2 (In Press)

Read more: ...

Response Prediction Analysis of RC Frame Structures Using Support Vector Machine Algorithm
Response Prediction Analysis of RC Frame Structures Using Support Vector Machine AlgorithmVolume 28, Issue 2 (In Press)

Read more: ...

Using the non-dominated sorting genetic algorithm II for multi-objective optimization of acoustic performance in sandwich panels with cellular honeycomb core
Using the non-dominated sorting genetic algorithm II for multi-objective optimization of acoustic performance in sandwich panels with cellular honeycomb coreVolume 28, Issue 2 (In Press)

Read more: ...

Analyzing Glass Configurations For Energy Efficiency In Building Envelopes: A Comparative
Analyzing Glass Configurations For Energy Efficiency In Building Envelopes: A ComparativeVolume 28, Issue 2 (In Press)

Read more: ...

Assessment of the optimal gold recovery rate through heap leach extraction process from hydrothermal alteration zone ore
Assessment of the optimal gold recovery rate through heap leach extraction process from hydrothermal alteration zone oreVolume 28, Issue 2 (In Press)

Read more: ...

Research on the Time-Varying Relationship between Macroeconomic Variables and the Stock Market Volatility Based on TVP-VAR Model
Research on the Time-Varying Relationship between Macroeconomic Variables and the Stock Market Volatility Based on TVP-VAR ModelVolume 28, Issue 2 (In Press)

Read more: ...