Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

2.10

CiteScore

Material Engineering

An Experimental Study to Determine the Correlation Between Tool Wear and Residual Stresses Induced in Turning of Inconel 718

An Experimental Study to Determine the Correlation Between Tool Wear and Residual Stresses Induced in Turning of Inconel 718

Study on High Temperature Wear Law and Wear Prediction Method of Hot Forging Die Steel H13

Study on High Temperature Wear Law and Wear Prediction Method of Hot Forging Die Steel H13

Study on the conductivity of graphite modified asphalt concrete for snow melting and deicing based on modified self-consistent model

Study on the conductivity of graphite modified asphalt concrete for snow melting and deicing based on modified self-consistent model

Sol-gel prepared of LaMnO3 perovskite: characterisation and catalytic activity in 2-phenylbenzo[d]imidazo[2,1-b]thiazole synthesis

Sol-gel prepared of LaMnO3 perovskite: characterisation and catalytic activity in 2-phenylbenzo[d]imidazo[2,1-b]thiazole synthesis

The Simulation Analysis of the Capacity Loss of the High Power LiFePO4-graphite Li-ion Batteries under Different Charging Strategies

The Simulation Analysis of the Capacity Loss of the High Power LiFePO4-graphite Li-ion Batteries under Different Charging Strategies

Prediction of compressive strength of high-performance concrete using multi-layer perceptron

Prediction of compressive strength of high-performance concrete using multi-layer perceptron

Eggshell as an alternative source of calcium for nitrate fertilizer bead gel

Eggshell as an alternative source of calcium for nitrate fertilizer bead gel

Manufacturing of an Innovative Unit for Biochar Production from Agricultural By-Products

Manufacturing of an Innovative Unit for Biochar Production from Agricultural By-Products

Enhancement in the Hardness and Corrosion Resistance of Mild Steel Surfaces by Nickel-Chromium Addition and Rapid Cooling After Welding

Enhancement in the Hardness and Corrosion Resistance of Mild Steel Surfaces by Nickel-Chromium Addition and Rapid Cooling After Welding

Field application test of heavy oil catalytic hydrothermal cracking modification and viscosity reduction technology in China

Field application test of heavy oil catalytic hydrothermal cracking modification and viscosity reduction technology in China

The Role of Iron dopant on the Photocatalytic performance of anatase TiO2: Synthesis, Characterization, and Removal of Bisphenol-A under Simulated Natural Light

The Role of Iron dopant on the Photocatalytic performance of anatase TiO2: Synthesis, Characterization, and Removal of Bisphenol-A under Simulated Natural Light

Strengthening Road Pavement Concrete by Combining Crumb Rubber with SFRC Fibers

Strengthening Road Pavement Concrete by Combining Crumb Rubber with SFRC Fibers

Mechanical Responses of Curved Pipe Corssing Mining Subsidence Area

Mechanical Responses of Curved Pipe Corssing Mining Subsidence Area

Effect of Cracks on the Vibration and Bending Behavior of Steel and Aluminum Bars using Finite Element Analysis

Effect of Cracks on the Vibration and Bending Behavior of Steel and Aluminum Bars using Finite Element Analysis

Ambient-temperature conversion of metakaolin to sub-micron LTA zeolite and its copper ion removal efficiency

Ambient-temperature conversion of metakaolin to sub-micron LTA zeolite and its copper ion removal efficiency

Parametric Analysis Of Heat-Affected Zone (HAZ) Characterictic And Taper Angle During Machining Of Alumina Ceramic Using CO2 Laser

Parametric Analysis Of Heat-Affected Zone (HAZ) Characteristic And Taper Angle During Machining Of Alumina Ceramic Using CO2 Laser

Assessment of engineering properties and durability of concrete using steel slag as coarse aggregate

Assessment of engineering properties and durability of concrete using steel slag as coarse aggregate

Application of Chimp-based ANFIS model for forecasting the compressive strength of the improved high-performance concrete

Application of Chimp-based ANFIS model for forecasting the compressive strength of the improved high-performance concrete

Formability Prediction of AISI 304 Steel Sheet Based on Forming Limit Diagram through Finite Element Analysis and Nakazima Test

Formability Prediction of AISI 304 Steel Sheet Based on Forming Limit Diagram through Finite Element Analysis and Nakazima Test

Lubrication Performance of Gas-Lubricated Inclined Slider Bearing with Micro-Grooves

Lubrication Performance of Gas-Lubricated Inclined Slider Bearing with Micro-Grooves

Page 2 of 6

The Dynamic Correlation between News Sentiment and Housing Price Volatility: A Heterogeneity Perspective

The Dynamic Correlation between News Sentiment and Housing Price Volatility: A Heterogeneity PerspectiveVolume 29, Issue 2

Asphalt Self-Healing Effect Based on Stress-Controlled Release Microcapsules

Asphalt Self-Healing Effect Based on Stress-Controlled Release MicrocapsulesVolume 29, Issue 2

YOLOv5-DTW: Gesture recognition based on YOLOv5 and dynamic time warping for digital media design

YOLOv5-DTW: Gesture recognition based on YOLOv5 and dynamic time warping for digital media designVolume 29, Issue 2

Modified generative adversarial network and Pseudo- Zernike matrix features extraction for human-computer interactive gesture recognition

Modified generative adversarial network and Pseudo- Zernike matrix features extraction for human-computer interactive gesture recognitionVolume 29, Issue 2

Comprehensive Utilization and Optimal Allocation of Environmental Protection Building Materials in the Construction of Civil Engineering

Comprehensive Utilization and Optimal Allocation of Environmental Protection Building Materials in the Construction of Civil EngineeringVolume 29, Issue 2

Embedding b-Metric Spaces of Reducible Fuzzy Digraphs into Normed Spaces

Embedding b-Metric Spaces of Reducible Fuzzy Digraphs into Normed SpacesVolume 29, Issue 2

Partial Fuzzy Soft Metric Space

Partial Fuzzy Soft Metric SpaceVolume 29, Issue 2

Investigation on the Effects of Distance-to-Diameter Ratio of piers on the Hydraulic Characteristics in a 90° Open Channel Bend

Investigation on the Effects of Distance-to-Diameter Ratio of piers on the Hydraulic Characteristics in a 90° Open Channel BendVolume 29, Issue 2

Phosphorus Recovery by Activated Carbons (ACs) and Nano Iron Oxide/Activated Carbons (Fe3O4/AC) Composites in Flow-electrode Capacitive Deionization (FCDI) System

Phosphorus Recovery by Activated Carbons (ACs) and Nano Iron Oxide/Activated Carbons (Fe3O4/AC) Composites in Flow-electrode Capacitive Deionization (FCDI) SystemVolume 29, Issue 2

Simultaneous doping of nitrogen, sulfur and fluorine into Reduced Graphene Oxide and Its Electrochemical Properties

Simultaneous doping of nitrogen, sulfur and fluorine into Reduced Graphene Oxide and Its Electrochemical PropertiesVolume 29, Issue 2

Removal of Eriochrome Black T (EBT) and Its Pb(II)-, Cu(II)-, and Zn(II)-Based Metal Complexes from Aqueous Solutions Using Spent Coffee Grounds: Part A – Characterization and Adsorption Isotherms

Removal of Eriochrome Black T (EBT) and Its Pb(II)-, Cu(II)-, and Zn(II)-Based Metal Complexes from Aqueous Solutions Using Spent Coffee Grounds: Part A – Characterization and Adsorption IsothermsVolume 29, Issue 2

Comparative study on the pyrolysis characteristics and gaseous release behavior of different reconstituted tobacco cut stem in processing

Comparative study on the pyrolysis characteristics and gaseous release behavior of different reconstituted tobacco cut stem in processingVolume 29, Issue 2

EGS design and production capacity evaluation of hot dry rock considering complex cracks

EGS design and production capacity evaluation of hot dry rock considering complex cracksVolume 29, Issue 2

Investigating the Optimal Flow Rate for Hydroponic Plants Using IoT and the Decision Tree Model

Investigating the Optimal Flow Rate for Hydroponic Plants Using IoT and the Decision Tree ModelVolume 29, Issue 2

Student employment forecasting model based on random forest and multi-features fusion

Student employment forecasting model based on random forest and multi-features fusionVolume 29, Issue 2

Potential of Psidium guajava Leaf as Natural UV Filter in Topical Sunscreen Emulsion

Potential of Psidium guajava Leaf as Natural UV Filter in Topical Sunscreen EmulsionVolume 29, Issue 2

Reinforcement Learning-driven Mechanism Study of Ecological Compensation to Suppress Carbon Lock-in

Reinforcement Learning-driven Mechanism Study of Ecological Compensation to Suppress Carbon Lock-inVolume 29, Issue 2

Magnesium Hybrid Metal Composite via Infiltrated Stir Casting Technique: A Novel Approach to Enhance Energy Absorption

Magnesium Hybrid Metal Composite via Infiltrated Stir Casting Technique: A Novel Approach to Enhance Energy AbsorptionVolume 29, Issue 2

Calculus accumulation-based method for extracting values of instrumentation image

Calculus accumulation-based method for extracting values of instrumentation imageVolume 29, Issue 2

Research on determining the correlation between the strength of the concrete core and the concrete used as tubular formwork in compressed structural elements

Research on determining the correlation between the strength of the concrete core and the concrete used as tubular formwork in compressed structural elementsVolume 29, Issue 2

Design of a Visual Communication System for Animated Characters in Virtual Reality Using Sobel Edge Detection and Motion Capture

Design of a Visual Communication System for Animated Characters in Virtual Reality Using Sobel Edge Detection and Motion CaptureVolume 29, Issue 1

Investigation of the Cyclic Performance of Flat Steel Shear Walls Stiffened with Double-Sided Trapezoidal Corrugated Plates

Investigation of the Cyclic Performance of Flat Steel Shear Walls Stiffened with Double-Sided Trapezoidal Corrugated PlatesVolume 29, Issue 1

Hierarchical Control of Energy Router Based on MPC and Real-Time Optimization Methods for Distribution Network

Hierarchical Control of Energy Router Based on MPC and Real-Time Optimization Methods for Distribution NetworkVolume 29, Issue 1

Using additives to enhance the compressive strength of particulate composites

Using additives to enhance the compressive strength of particulate compositesVolume 29, Issue 1

Characterization of wood plastic composites using jackfruit wood sawdust in a PLA/HDPE blend

Characterization of wood plastic composites using jackfruit wood sawdust in a PLA/HDPE blendVolume 29, Issue 1

Detecting sand gradation based on the two-dimensional sand particle features in sand images

Detecting sand gradation based on the two-dimensional sand particle features in sand imagesVolume 29, Issue 1

Takagi-Sugeno Model-Based Control with Observer Design for Disturbance Rejection and Input Constraints in Rotary Inverted Pendulum Systems

Takagi-Sugeno Model-Based Control with Observer Design for Disturbance Rejection and Input Constraints in Rotary Inverted Pendulum SystemsVolume 29, Issue 1

Process Intensification and Optimization of Bio-Indigo Production from Indigofera tinctoria using Trichoderma Cellulase

Process Intensification and Optimization of Bio-Indigo Production from Indigofera tinctoria using Trichoderma CellulaseVolume 29, Issue 1

Artificial intelligence-based Bayesian optimization and transformer model for tennis motion recognition

Artificial intelligence-based Bayesian optimization and transformer model for tennis motion recognitionVolume 29, Issue 1

Red Fox Optimization-Based Estimation Algorithms for Splitting Tensile Strength of Basalt Fiber Reinforced Concrete

Red Fox Optimization-Based Estimation Algorithms for Splitting Tensile Strength of Basalt Fiber Reinforced ConcreteVolume 29, Issue 1

Trustworthy-constraint Deep Graph Learning for Enterprise Financial Risk Prediction

Trustworthy-constraint Deep Graph Learning for Enterprise Financial Risk PredictionVolume 29, Issue 1

Optimal allocation of supercapacitor energy storage system capacity for mitigating wind power fluctuations

Optimal allocation of supercapacitor energy storage system capacity for mitigating wind power fluctuationsVolume 29, Issue 1

Article1
Article2
Article3
Article4
Article5
Article6
Article7
Article8

Partners